Гидравлические насосы

Двухсекционный шестеренчатый гидравлический насос Haldex WQ09A2

Описание - 181.20.B41.00 HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **

нетто: 2667,29 PLN

WH 5WHP2/19202VOL

Наличие: доступный (количество: 26) , 7 dni

Описание - Двухсекционный шестеренчатый гидравлический насос Haldex WQ09A2

Producent - Originally BARNES

Код сравнения - 1920205, 11699037008

Направление поворота - Верно

Тип насоса - Двойная передача

нетто: 2591,31 PLN

WH 5WHP2/1X09RHIT

ЗАМЕНА ДЛЯ: 1LM27-27IX09RH1

ЗАМЕНА ДЛЯ: WQ09A2 1920135

Описание - TANDEM HYDRAULIC GEAR PUMP
** Note this is NOT a sealed
section pump **
** STORES TAKE PHOTO PLEASE **TANDEM HYDRAULIC GEAR PUMP
** Note this is NOT a sealed
section pump **
** STORES TAKE PHOTO PLEASE **
Manufactured by WHP. Delivery time approx. 2-3 days.
* Please note this is NOT a sealed section pump *
Hitachi

Producent - Originally ROQUET

нетто: 2591,31 PLN

WH 5WHP2/20135HAL

Описание - HALDEX TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **HALDEX TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Replacement pump manufactured by WHP. Delivery time approx 2-3 days

Producent - Originally HALDEX

нетто: 2591,31 PLN

WH 5WHP2/21250PAR

ЗАМЕНА ДЛЯ: 3339121250

Описание - TANDEM HYDRAULIC GEAR PUMPTANDEM HYDRAULIC GEAR PUMP
Replacement pump manufactured by WHP. Delivery time approx. 2-3 days.

Producent - Originally PARKER

нетто: 3807,17 PLN

WH 5WHP2/21401PAR

ЗАМЕНА ДЛЯ: 3349121401

Описание - TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Manufactured by WHP. Delivery time approx. 2-3 days.

Producent - Originally PARKER

нетто: 2591,31 PLN

WH 5WHP2/21616PAR

ЗАМЕНА ДЛЯ: 3349121616

ЗАМЕНА ДАНФОСС ДЛЯ K310386

Описание - TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Replacement pump manufactured by WHP. Delivery time approx. 2-3 days.

Producent - Originally PARKER

нетто: 2591,31 PLN

WH 5WHP2/21865CAS

Описание - ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС

нетто: 2426,87 PLN

WH 5WHP2/21982HAL

ЗАМЕНА ДЛЯ: 2198233

Описание - TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Equivalent pump manufactured by WHP. Delivery time 2-3 days.
Ransomes

Producent - Originally HALDEX BARNES

нетто: 2591,31 PLN

WH 5WHP2/22115PAR

ЗАМЕНА ДЛЯ: 3339122115

Producent - Originally PARKER

нетто: 3807,17 PLN

WH 5WHP2/24384HYS

ЗАМЕНА БЕТА

Описание - HYDRAULIC GEAR PUMP
FOR 5C2/24384RAE
Length from face of flange
to end of pump =HYDRAULIC GEAR PUMP
FOR 5C2/24384RAE
Length from face of flange
to end of pump =
Manufactured by WHP. Delivery approximately 2-3 days.
Hyster:

Producent - Originally CESSNA: 24384-RAE

нетто: 2591,31 PLN

WH 5WHP2/25303REX

ЗАМЕНА НА РЕКСРОТ

Наличие: доступный (количество: 26) , 7 dni

Описание - 2PF2G241/11+08LRO1MR / 23225303
TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **2PF2G241/11+08LRO1MR / 23225303
TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Replacement pump manufactured by WHP. Delivery time approx. 2-3 days

Producent - Originally REXROTH

нетто: 2591,31 PLN

WH 5WHP2/25504CAS

ЗАМЕНА НА 66603067

Описание - S12 TANDEM HYDRAULIC GEAR PUMPS12 TANDEM HYDRAULIC GEAR PUMP
Replacement pump manufactured by WHP. Delivery time approx. 2-3 days.

Producent - Originally Casappa

нетто: 2591,31 PLN

WH 5WHP2/259265BER

ТАНДЕМНЫЙ ГИДРАВЛИЧЕСКИЙ ШЕСТЕРЕНЧАТЫЙ НАСОС

Описание - S17 33 CC/REV C/W RotationS17 33 CC/REV C/W Rotation
Bespoke Build. Copy of SOR259265. (Delivery approx. 2-3 days)

PAS17330S2SB2AV - C/W Rotation
SIDE INLET 1.1/4" SAE S/F M10 Horizontal
SIDE OUTLET 1.1/4" SAE S/F M10 Horizontal

PAS17-S12CKSC

PAS12130BE
SIDE INLET 20 X 40 M6 EURO SQ
SIDE OUTLET 15 X 35 M6 EURO SQ

Producent - WHITE HOUSE PRODUCTS

нетто: 4187,12 PLN

WH 5WHP2/2609HAM

Р1А50534032/002609АС

ЗАМЕНА: R1A40324032/089304/1C

Описание - HYDRAULIC GEAR PUMP
***********************************
STORES TAKE PHOTO PLEASE
***********************************HYDRAULIC GEAR PUMP
***********************************
STORES TAKE PHOTO PLEASE
***********************************
Manufactured by WHP. Delivery time 3-4 Days.

Producent - Originally HAMWORTHY, DAVID BROWN, HYDRECO

нетто: 9658,51 PLN

WH 5WHP2/30000POW

ТАНДЕМНЫЙ ГИДРАВЛИЧЕСКИЙ ШЕСТЕРЕНЧАТЫЙ НАСОС:

Описание - TANDEM HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump =TANDEM HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump =
Manufactured by WHP. Delivery approximately 2-3 days.
Powerscreen

Producent - Originally DAVID BROWN

нетто: 5554,97 PLN

WH 5WHP2/30026REX

Наличие: доступный (количество: 6) , 7 dni

Описание - 1PF2G3-3X 026RAD7MSK /
1PF2G3-30 020LND7MHL
*** STORES TAKE PHOTO PLEASE

Producent - Originally REXROTH SIGMA

нетто: 2895,27 PLN

WH 5WHP2/30237REX

REXROTH ТАНДЕМНЫЙ ЭКВИВАЛЕНТ

Описание - 1PF2G3-3X/023LD07MBK
1PF2G2-4X/008RN20MHN
HYDRAULIC GEAR PUMP1PF2G3-3X/023LD07MBK
1PF2G2-4X/008RN20MHN
HYDRAULIC GEAR PUMP
Replacement Tandem Gear pump manufactured by WHP. Delivery time 2-3 days.

Producent - Originally REXROTH

нетто: 4187,12 PLN

WH 5WHP2/30529KOM

ЗАМЕНА ДЛЯ KOMATSU

ЗАМЕНА: G331/38 + G241/16RD07

Описание - HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump = 185 mmHYDRAULIC GEAR PUMP
Length from face of flange
to end of pump = 185 mm
Equivalent pump manufactured by WHP. Delivery time approximately 2-3 days.
Komatsu: 840120006, 84012027

Producent - Originally IOTTI STROZZI: 2ISP27688GFD, 222005005325900, 2ISP5.5+2ISP5.5 GF/DTC

нетто: 2591,31 PLN

WH 5WHP2/31712REX

Описание - TANDEM HYDRAULIC GEAR PUMP
(Rear section Outlet port = 15/35
mm (M6)
** STORES TAKE PHOTO PLEASE **TANDEM HYDRAULIC GEAR PUMP
(Rear section Outlet port = 15/35
mm (M6)
** STORES TAKE PHOTO PLEASE **
Replacement pump manufactured by WHP. Delivery time approx. 2-3 days.
** Please check outlet port on rear section of the pump. This pump has Euro Sq. 15 x 35 M6 port but some versions have Euro Sq. 15 x 40 M6 ** - If you require 15 x 40 contact WHP for assistance.

*** 18MM LONGER THAN ORIGINAL AND FRONT PUMP IS WIDER. ***
Sambron / MF

Producent - Originally REXROTH

нетто: 3883,17 PLN

WH 5WHP2/36050HAY

ЗАМЕНА НА: 3349121557

БЕТА-ЭКВИВАЛЕНТНЫЙ НАСОС И АДПТ K2.

Описание - ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС + ПРЕДОХРАНИТЕЛЬНЫЙ КЛАПАН
** МАГАЗИНЫ СДЕЛАЙТЕ ФОТО, ПОЖАЛУЙСТА ** ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС + ПРЕДОХРАНИТЕЛЬНЫЙ КЛАПАН
** В МАГАЗИНАХ СДЕЛАЙТЕ ФОТО, ПОЖАЛУЙСТА ** Запасной насос производства White House Products Ltd. Предохранительный клапан настроен на давление 110 бар. Хейтер

Producent - Originally Parker / Ultra

нетто: 3199,24 PLN

WH 5WHP2/39879MAN

ЭКВИВАЛЕНТ БЕТА ЭТО УЛЬТРА НАСОС

Описание - 2PL1051PL052CQX**BN
Length from face of flange
to end of pump =277 mm
PHOTO DONE2PL1051PL052CQX**BN
Length from face of flange
to end of pump =277 mm
PHOTO DONE
Manufactured by WHP. Delivery approximately 2-3 days.
Manitou: 78779, 10A63623, 78779H2818.

Producent - Originally ULTRA: 2PL1051PL052CQX**BN 8596, 0502X 2PL1051PL052C8596

нетто: 3807,17 PLN

WH 5WHP2/39880MAN

БЕТА-ЭКВИВАЛЕНТНЫЙ НАСОС ДЛЯ URRACO

Описание - No. 4056B (Our no. 5U2/39880MAN)
Length from face of flange
to end of pump =250mm
TANDEM HYDRAULIC GEAR PUMPNo. 4056B (Our no. 5U2/39880MAN)
Length from face of flange
to end of pump =250mm
TANDEM HYDRAULIC GEAR PUMP
Manufactured by WHP. Delivery approximately 2-3 days.
Manitou: 177809H2284, 177809

Producent - Originally ULTRA: 1712J, 4056B, 2PL090 1PL028 ATDS*BN 8493, 8505

нетто: 3807,17 PLN

WH 5WHP2/39890URR

Описание - CAPRONI 32A32X276H + A11X201B
Length from face of flange
to end of pump =
PHOTO DONE

нетто: 3275,22 PLN

WH 5WHP2/39946REN

ЗАМЕНА НА 5S2/39946РЕН

Описание - THIS PUMP SHOULD HAVE A SLOTTED
FLANGE AND A SEALED CENTRE
Length from face of flange
to end of pump =THIS PUMP SHOULD HAVE A SLOTTED
FLANGE AND A SEALED CENTRE
Length from face of flange
to end of pump =
Manufactured by WHP. Delivery approximately 2-3 days.
Renault: 7700054245

Producent - Originally SAUER DANFOSS: 181.20.A66.00

нетто: 2591,31 PLN

WH 5WHP2/39947REN

ЗАМЕНА НА 0510 765 354

Описание - Length from face of flange
to end of pump =

нетто: 2591,31 PLN

WH 5WHP2/39959REN

ЗАМЕНА НА 5H2/39959REN

БЕТА-ЭКВИВ ДЛЯ 5HP2/39993MAN

Описание - HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump = 193MMHYDRAULIC GEAR PUMP
Length from face of flange
to end of pump = 193MM
Manufactured by WHP. Delivery approximately 2-3 days.
FA.RENAULT, ALLIS CHALMERS

Producent - Originally HYDRAUQUIP ENERFLUX BOSCH REXROTH

нетто: 2819,28 PLN

WH 5WHP2/39993MAN

Наличие: доступный (количество: 15) , 7 dni

Описание - P1AAN2022YD2008YL30A01
9 TOOTH OR 10 TOOTH REFER TO SAMPLE
Length from face of flange
to end of pump =P1AAN2022YD2008YL30A01
9 TOOTH OR 10 TOOTH REFER TO SAMPLE
Length from face of flange
to end of pump =
Manufactured by WHP. Delivery approximately 2-3 days.
Manitou: 182307

Producent - Originally HPI: P1AAN2022YD2008YL30A01 A-5072572

нетто: 2591,31 PLN

WH 5WHP2/39996MAN

P1AAN2022YD2008YL30A17 HPI

Наличие: доступный (количество: 15) , 7 dni

Описание - EQUIVALENT - 10 TOOTH SPLINED SHAFT
Length from face of flange
to end of pump = 181mmEQUIVALENT - 10 TOOTH SPLINED SHAFT
Length from face of flange
to end of pump = 181mm
GEAR PUMP

Manufactured by WHP. Delivery approximately 2-3 days.
Manitou:

Producent - Originally HPI: A.5072572 10124610 P1AAN2022YD2008YL30-A01

нетто: 2591,31 PLN

WH 5WHP2/40001BOS

ЗАМЕНА WHP BETA ДЛЯ: 0510565084

Шестеренчатый гидронасос HYUNDAI 31LF-40010

Описание - TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Replacement pump manufactured by WHP. Delivery approx. 2-3 days. See part number: 5B2/40001BOS for genuine Bosch pump.
Bomag

Producent - Originally Bosch

нетто: 2591,31 PLN

WH 5WHP2/40010HYU

SAMBRON ТАНДЕМНЫЙ ГИДРАВЛИЧЕСКИЙ ШЕСТЕРЕНЧАТЫЙ НАСОС

Описание - Шестеренчатый гидронасос HYUNDAI 31LF-40010

Producent - Originally HEMA / DAVID BROWN

Код сравнения - 31LF-40010

Направление поворота - Верно

Центрирующий диаметр - 82,5 мм

Тип насоса - Двойная передача

нетто: 2591,31 PLN

WH 5WHP2/40019SAM

ЗАМЕНА НАСОСА ДЛЯ ULTRA TANDEM

Описание - P2AAN3025HA2006HL30A02 or
1PF2G330026LD07MBK+1PF2G240005RN20M
Length from face of flange
to end of pump =P2AAN3025HA2006HL30A02 or
1PF2G330026LD07MBK+1PF2G240005RN20M
Length from face of flange
to end of pump =
Manufactured by WHP. Delivery approximately 2-3 days.
Sambron:

Producent - Originally HPI / ENERFLUX: P2AAN3025HA2006HL30A02 C5079309

нетто: 3503,21 PLN

WH 5WHP2/40034MCC

ЗАМЕНА ДЛЯ: A25/6.3L 32156

Описание - 5656B (5U2/40034MCC)
Length from face of flange
to end of pump = 252 mm5656B (5U2/40034MCC)
Length from face of flange
to end of pump = 252 mm
Equivalent pump manufactured by WHP. Delivery time approximately 2-3 days.
McCONNELL: 8201665, 8201660, 8201708, 8201467, 8201462, *9993

Producent - Originally CASAPPA, ULTRA: 8342, 5656B, 2PL1461PL028CSDFTBN, 8342, CPL46D03DY/CPL9AF, 78733750

нетто: 3731,18 PLN

WH 5WHP2/40039JCB

44 + 19 куб.см/оборот ГИДРАВЛИЧЕСКАЯ СОЕДИНИТЕЛЬНАЯ КОНСТРУКЦИЯ

Описание - JCB TANDEM HYDRAULIC GEAR PUMP
(Our old no. 5S2/40039JCB)
Length from face of flange
to end of pump =244MMJCB TANDEM HYDRAULIC GEAR PUMP
(Our old no. 5S2/40039JCB)
Length from face of flange
to end of pump =244MM
Manufactured by WHP. Delivery approximately 2-3 days.
JCB: 20/204300

Producent - Originally SAUER SUNDSTRAND: 550132156

нетто: 3807,17 PLN

WH 5WHP2/40040JCB

БЕТА ЗАМЕНА ДЛЯ: 550136331

Описание - GEAR PUMP FOR JCB 20/919000GEAR PUMP FOR JCB 20/919000
Manufactured by WHP. Delivery approximately 2-3 days.
JCB

Producent - Originally Bosch

нетто: 4289,18 PLN

WH 5WHP2/40051JCB

Описание - Manufactured by WHP. Delivery approximately 2-3 days.
JCB SERVICE

Producent - Originally SAUER SUNDSTRAND

нетто: 3731,18 PLN

WH 5WHP2/40059NIS

ЗАМЕНА НА 307012-1311

Описание - TANDEM HYDRAULIC GEAR PUMPTANDEM HYDRAULIC GEAR PUMP
Replacement pump manufactured by WHP. Delivery time approx. 2-3 days.
Nissan

Producent - Originally DIESEL KIKI, ULTRA, HITACHI

нетто: 2400,00 PLN

WH 5WHP2/40089DB

ЗАМЕНА WHP НА 550133155

нетто: 2819,28 PLN

WH 5WHP2/41203KUB

ЗАМЕНА НА 307012-9471

Описание - HYDRAULIC GEAR PUMPHYDRAULIC GEAR PUMP
Manufactured by WHP. Delivery time approx. 2-3 days.
Supplied with 8 bolt rear outlet port to suit applications with diamond or square port configuration.
Kubota

Producent - Originally HITACHI

нетто: 3009,27 PLN

WH 5WHP2/41204KUB

ЗАМЕНА НА 9218059

Наличие: доступный (количество: 19) , 7 dni

Описание - TANDEM HYDRAULIC GEAR PUMP
** sealed centre kit **
Length from face of flange to end
of pump = 207 mmTANDEM HYDRAULIC GEAR PUMP
** sealed centre kit **
Length from face of flange to end
of pump = 207 mm
Manufactured by WHP. Delivery time approximately 2-3 days.
Kubota

Producent - Originally HITACHI, ZEXEL

нетто: 2819,28 PLN

WH 5WHP2/41207KUB

ЗАМЕНА: ХИТАЧИ 9218070

Описание - ** This pump is smaller than the
original due to different centre
section configuration. Flexible
hose connections required **
TANDEM HYDRAULIC GEAR PUMP** This pump is smaller than the
original due to different centre
section configuration. Flexible
hose connections required **
TANDEM HYDRAULIC GEAR PUMP
Equivalent pump manufactured by WHP. Delivery time 2-3 days.
Kubota

Producent - Originally HITACHI

Код сравнения - 5WHP241207KUB

нетто: 2591,31 PLN

WH 5WHP2/41209KUB

ЗАМЕНА НА ХИТАЧИ 307012-6111

Описание - TANDEM HYDRAULIC GEAR PUMPTANDEM HYDRAULIC GEAR PUMP
Equivalent pump manufactured by WHP. Delivery time approximately 2-3 days.
Kubota

Producent - Originally DIESEL KIKI, ZEXEL, HITACHI

нетто: 2819,28 PLN

WH 5WHP2/41210KUB

ЗАМЕНА WHP ДЛЯ ZEXEL:

ЭКВИВАЛЕНТ WHP ДЛЯ КУБОТЫ

Описание - 307012-5001
***********************************
PLEASE CHECK PORT SIZES BEFORE
CONFIRMING AN ORDER - See Notes
***********************************307012-5001
***********************************
PLEASE CHECK PORT SIZES BEFORE
CONFIRMING AN ORDER - See Notes
***********************************
*** CHECK PORTS BEFORE ORDERING ***
This unit has the following ports:
Side Inlets (Front & Rear Section) - Euro SQ - 20 x 40 M6
Side Outlets (Front & Rear Section) - Euro SQ - 15 x 35 M6

Contact WHP if your pump has different ports

Manufactured by WHP. Delivery time approximately 2-3 days.

Kubota

Producent - Originally Hitachi, Zexel, Diesel Kiki

нетто: 2819,28 PLN

WH 5WHP2/41212KUB

Наличие: доступный (количество: 17) , 7 dni

Описание - TANDEM HYDRAULIC GEAR PUMP
Top of flange to end of pump =200mmTANDEM HYDRAULIC GEAR PUMP
Top of flange to end of pump =200mm
Replacement pump manufactured by WHP. Delivery approximately 2-3 days.
Kubota: 9621810752, 68761-61110, 74918H

Producent - Originally ZEXEL, DIESEL KIKI: 307012-1100 , 307012-1021, 9218028, 74918H, 307012-1020

нетто: 2819,28 PLN

WH 5WHP2/41213KUB

WHP EQUIV ДЛЯ КУБОТЫ 307016-0131 &

ЗАМЕНА ДЛЯ ZEXEL 307016-0111

Описание - GEAR PUMP
Length from face of flange
to end of pump =200mmGEAR PUMP
Length from face of flange
to end of pump =200mm
Manufactured by WHP. Delivery approximately 2-3 days.
Kubota

Producent - Originally DIESEL KIKI

нетто: 2819,28 PLN

WH 5WHP2/41214KUB

WHP, ЭКВИВИРУЮЩИЙ ZEXEL / ДИЗЕЛЬ

Описание - HYDRAULIC GEAR PUMPHYDRAULIC GEAR PUMP
Original Zexel pump is now obsolete. This unit is manufactured by WHP. Delivery time approximately 2-3 days.
Kubota

Producent - Originally ZEXEL, HITACHI

нетто: 2895,27 PLN

WH 5WHP2/41215KUB

ЗАМЕНА ДЛЯ: 307012-0031 /

Описание - КИКИ Нет. 307016-0121
ТАНДЕМНЫЙ ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС
**********************************
Магазины = Пожалуйста, сфотографируйте насос
**********************************

нетто: 2819,28 PLN

WH 5WHP2/41218IHI

ЗАМЕНА ДЛЯ: КУБОТА 9218069 &

Описание - 307012-0032 TANDEM HYDRAULIC GEAR
PUMP307012-0032 TANDEM HYDRAULIC GEAR
PUMP
Replacement pump manufactured by WHP. This unit is 8cc + 8cc/rev, the original was 7cc + 7cc/rev.
Delivery time approx. 2-3 days.
IHI

Producent - Originally Diesel Kiki / Hitachi / Zexel

нетто: 2819,28 PLN

WH 5WHP2/41219KIK

Наличие: доступный (количество: 22) , 7 dni

нетто: 2819,28 PLN

WH 5WHP2/41250JD

БЕТА-ЗАМЕНА ДЛЯ: 9218033

Описание - LENGTH FROM FACE OF MTG FLANGE TO
END OF REAR COVER = 192 mm
HYDRAULIC GEAR PUMPLENGTH FROM FACE OF MTG FLANGE TO
END OF REAR COVER = 192 mm
HYDRAULIC GEAR PUMP
WHP Manufacture this pump. Delivery time approximately 2-3 days.
John Deere

Producent - Originally HITACHI

нетто: 2819,28 PLN

WH 5WHP2/41251JD

ЗАМЕНА ДЛЯ: 612021062

Описание - TANDEM HYDRAULIC GEAR PUMPTANDEM HYDRAULIC GEAR PUMP
Replacement tandem pump manufactured by WHP. Delivery time approx. 2-3 days.
John Deere

Producent - Originally SALAMI

нетто: 2667,29 PLN

WH 5WHP2/42051LAN

ЗАМЕНА НА: 4205157M91

Описание - TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE**TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE**
Replacement pump manufactured by WHP. Delivery time approx. 2-3 days.
Landini / Massey Ferguson

Producent - Originally Sauer

нетто: 2591,31 PLN

WH 5WHP2/42510LAN

ЛАНДИНИ 181.22.031.00

Описание - TANDEM GEAR PUMP
Length from face of flange
to end of pump =TANDEM GEAR PUMP
Length from face of flange
to end of pump =
Manufactured by WHP. Delivery approximately 2-3 days.
Landini:

Producent - Originally SAUER DANFOSS / DYNAMATICS: 181.22.031.00

нетто: 2591,31 PLN

WH 5WHP2/44336JCB

ЗАМЕНА ДЛЯ: 3349121211

ГИДРАВЛИЧЕСКИЙ ШЕСТЕРЕНЧАТЫЙ НАСОС KOMATSU

Описание - TANDEM HYDRAULIC GEAR PUMPTANDEM HYDRAULIC GEAR PUMP
Manufactured by WHP. Delivery approximately 2-3 days.
JCB

Producent - Originally PARKER

нетто: 2716,17 PLN

WH 5WHP2/45010KOM

БД ТАНДЕМ ДЛЯ BOSS: 7546544

Описание - Length from face of flange
to end of pump =

нетто: 2400,00 PLN

WH 5WHP2/46544BOS

БЕТА ЗАМЕНА НА УСТАРЕВШИЕ

Описание -
** STORES PLS TAKE PHOTO **
** STORES PLS TAKE PHOTO **
Manufactured by WHP. Delivery approximately 2-3 days.
Boss

Producent - Originally DAVID BROWN

нетто: 9658,51 PLN

WH 5WHP2/49000KUB

Описание - KAYABA PUMP No: KHP4-17-17-CD
LENGTH FROM FACE OF MTG FLANGE
TO END OF REAR COVER =182mmKAYABA PUMP No: KHP4-17-17-CD
LENGTH FROM FACE OF MTG FLANGE
TO END OF REAR COVER =182mm
Manufactured by WHP. Delivery approximately 2-3 days.
KUBOTA, CASE

Producent - Originally KAYABA

нетто: 2591,31 PLN

WH 5WHP2/49001KUB

ЗАМЕНА ДЛЯ: 68271-6104-2

Описание - KHP41919CD
HYDRAULIC GEAR PUMP
*** STORES TAKE PHOTO PLEASE ***
Kubota

Producent - Originally KAYABA

нетто: 2591,31 PLN

WH 5WHP2/49905JH

EXTEC HP1039 ТАНДЕМ

Описание - Р1А4027Р4027К32А1К3Б0С3БК
*МАГАЗИНЫ СДЕЛАЙТЕ ФОТО, ПОЖАЛУЙСТА*

нетто: 7150,79 PLN

WH 5WHP2/49950BOS

ПЕРЕДНИЙ НАСОС 57CC/ОБ.

ЗАМЕНА НА BOSCH 0510665390

Описание - Length from face of flange
to end of pump =Length from face of flange
to end of pump =
Manufactured by WHP. Delivery approximately 2-3 days.

Producent - Originally Bosch:

нетто: 3807,17 PLN

WH 5WHP2/49952BOS

Описание - JOHN DEERE AZ365555
Face of flange to end of pump 191mm
HYDRAULIC GEAR PUMPJOHN DEERE AZ365555
Face of flange to end of pump 191mm
HYDRAULIC GEAR PUMP
Manufactured by WHP. Delivery approximately 2-3 days.
John Deere: AZ36555

Producent - Originally Bosch: 0510665390

Код сравнения - 0510665390,

нетто: 2819,28 PLN

WH 5WHP2/50021IHI

ЭКВИВАЛЕНТ ДЛЯ: A77R402

ЗАМЕНА БЕТА НА IHI: 0750068UA

Описание - YPD2A7.7A3H9-R402
HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **

Producent - SHIMADZU

нетто: 3655,18 PLN

WH 5WHP2/50068IHI

БЕТА-ЭКВИВАЛЕНТ ДЛЯ JOHNSON

Описание - (CASAPPA: 67051095 / 67051100
HYDRAULIC GEAR PUMP
Length = 158 mm (face of flange to
end of pump)(CASAPPA: 67051095 / 67051100
HYDRAULIC GEAR PUMP
Length = 158 mm (face of flange to
end of pump)
Manufactured by WHP. Delivery approximately 2-3 days.
IHI

Producent - Originally Casappa

нетто: 2591,31 PLN

WH 5WHP2/50978JON

Описание - SWEEPER - A5097826
** STORES PLS TAKE PHOTO **SWEEPER - A5097826
** STORES PLS TAKE PHOTO **
HPI Equivalent pump manufactured by WHP. Delivery time approximately 2-3 days.
JOHNSON

Producent - Originally HPI

нетто: 3655,18 PLN

WH 5WHP2/51004DB

Р1А51004032К52Б1Х1Ф1Д1БА

ЗАМЕНА ДЛЯ: HPLPB226DMLG6G6BDD

Описание - HYDRAULIC GEAR PUMP
********************************
STORES TAKE PHOTO PLEASE
********************************HYDRAULIC GEAR PUMP
********************************
STORES TAKE PHOTO PLEASE
********************************
Manufactured by WHP. Delivery time approx. 3-4 days.

Producent - Originally DAVID BROWN, HYDRECO

нетто: 8777,01 PLN

WH 5WHP2/51086B&P

Описание - TANDEM HYDRAULIC GEAR PUMPTANDEM HYDRAULIC GEAR PUMP
Replacement tandem pump manufactured by WHP. Delivery time approx. 2-3 days.

Producent - Originally BONDIOLI & PAVESI

нетто: 2591,31 PLN

WH 5WHP2/57150ZET

ЗАМЕНА ДЛЯ: 0510765029

Producent - Originally Bosch

нетто: 2819,28 PLN

WH 5WHP2/58893CAS

ЗАМЕНА НА 67058893

ЗАМЕНА ТАНДЕМНОГО ТРАКТОРА KIOTI

Описание - TANDEM HYDRAULIC GEAR PUMP TANDEM HYDRAULIC GEAR PUMP
Equivalent pump manufactured by WHP. Delivery time approx. 2-3 days
Case

Producent - Originally Casappa

нетто: 2591,31 PLN

WH 5WHP2/58900KIO

ТАНДЕМНЫЙ ГИДРАВЛИЧЕСКИЙ ШЕСТЕРЕННЫЙ НАСОС

Описание - HYDRAULIC GEAR PUMP
* Customer's Machine must have
flexible Pipes * Sales - Please
print Beta pump drawing from
Database for Build Area ***HYDRAULIC GEAR PUMP
* Customer's Machine must have
flexible Pipes * Sales - Please
print Beta pump drawing from
Database for Build Area ***
Replacement pump manufactured by WHP. Delivery time 2-3 days.

Producent - Originally Hydrotech, Joyang

нетто: 2591,31 PLN

WH 5WHP2/61120COM

PGP6200260AD1H3VE6E5C620A0260XB1E5B

Описание - COM1061120 По часовой стрелке
Передняя часть: 8 куб.см/об
Общий вход Выход 3/4 дюйма JIC
Задний: 8 куб.см/об
Вход 1. 1/16 дюйма JIC. Выход: 3/4 JIC.

нетто: 2591,31 PLN

WH 5WHP2/620026PAR

БЕТА-ЭКВИВАЛЕНТ ДЛЯ: 0510765083

Описание - 1B1 HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **1B1 HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Manufactured by WHP from genuine Parker parts. Delivery time approx. 2-3 days.

Producent - PARKER

нетто: 6542,87 PLN

WH 5WHP2/65083BOB

Наличие: доступный (количество: 19) , 7 dni

Описание - HYDRAULIC GEAR PUMPHYDRAULIC GEAR PUMP
Manufactured by WHP. Delivery time approximately 2-3 days.
Bobcat

Producent - Originally Bosch

нетто: 3731,18 PLN

WH 5WHP2/65128CLA

ЗАМЕНА ДЛЯ: 0510665128

Описание - TANDEM HYDRAULIC GEAR PUMPTANDEM HYDRAULIC GEAR PUMP
Replacement Tandem pump manufactured by WHP. Delivery time 2-3 days.
Claas

Producent - Originally Bosch

нетто: 2819,28 PLN

WH 5WHP2/65147MCC

ЭКВИВАЛЕНТ МАККОРМИК: 6514794M91

ЗАМЕНА: 1PH229119CG/165401/2C

Описание - (Overall length is approx. 2mm
shorter than the original unit)(Overall length is approx. 2mm
shorter than the original unit)
Manufactured by WHP. Delivery approximately 2-3 days.
McCormick

Producent - Originally Casappa

нетто: 3807,17 PLN

WH 5WHP2/65401HYU

Описание - TANDEM HYDRAULIC GEAR PUMP
** Will only fit if the Customer's
Machine has flexible hoses **TANDEM HYDRAULIC GEAR PUMP
** Will only fit if the Customer's
Machine has flexible hoses **
Replacement pump manufactured by WHP. Delivery time approx. 2-3 days
Length from face of flange to end of pump = 190 mm
** Note that this will only fit if the machine has flexible hoses connecting to the pump ports. It will not fit if it has steel or metal pipes as it is an equivalent pump and the ports may not be in the exact position as the original pump **
Hyundai

Producent - Originally Hema, David Brown

нетто: 2591,31 PLN

WH 5WHP2/68330BOS

ЭКВИВАЛЕНТ ДАНФОСС:

Замена шестеренного насоса Caterpillar 157-2630

Описание - BOSCH REXROTH TANDEM: 0510768330
** STORES TAKE PHOTO PLS **

Producent - Originally BOSCH REXROTH

нетто: 4588,82 PLN

WH 5WHP2/72630CAT

Описание - Замена шестеренного насоса Caterpillar 157-2630 Центрирование: 101,5 мм Расстояние между крепежными болтами: 146 мм Направление вращения: Правое Тип вала: Шлицевые - 13 зубьев

Код сравнения - 157-2630

нетто: 3807,17 PLN

WH 5WHP2/82450COL

ТАНДЕМ: КОЛЕС - 8382450

СПЕЦИАЛЬНЫЙ ТАНДЕМ ДЛЯ B04:

Описание - HYDRAULIC PUMP
** STORES TAKE PHOTO PLS **HYDRAULIC PUMP
** STORES TAKE PHOTO PLS **
Manufactured by WHP. Delivery approximately 2-3 days.
Coles

Producent - Originally HYDRECO / DAVID BROWN / HAMWORTHY

нетто: 9658,51 PLN

WH 5WHP2/90047BRY

Описание - PAS12250S1SA2AV
PAS12-S12CI
PAS12160BE
**SPECIAL CONNECTING SHAFT DESIGN

нетто: 2591,31 PLN

WH 5WHP2/90055TOY

ЗАМЕНА ДЛЯ: 9510290055

Описание - TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Equivalent pump manufactured by WHP. Delivery time approx. 2-3 days.
Toyota

Producent - Originally Bosch

нетто: 2591,31 PLN

WH 5WHP2/92180HIT

ЗАМЕНА НА 9218031

ЗАМЕНА НА 9218055 16 + 16 A/C

Описание - HITACHI HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **HITACHI HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Equivalent pump manufactured by WHP. Delivery time approximately 2-3 days.
Hitachi

Producent - Originally HITACHI

нетто: 2895,27 PLN

WH 5WHP2/92181HIT

P2DBN2018CD2018CL10C02V HPI

Описание - TANDEM HYDRAULIC GEAR PUMP
** 15 mm special centre kit **
port positions adj (3.85 & 5.45 mm)
flange to 1st port 49 mm 2nd 143 mm
15 tooth spline 4 Bolt Hitachi

нетто: 2591,31 PLN

WH 5WHP2/94952HPI

Наличие: доступный (количество: 6) , 7 dni

Описание - EQUIVALENT HYDRAULIC GEAR PUMP
***********************************
STORES TAKE PHOTO PLEASE
***********************************EQUIVALENT HYDRAULIC GEAR PUMP
***********************************
STORES TAKE PHOTO PLEASE
***********************************
Equivalent pump manufactured by WHP. Delivery time approximately 3 days.

Producent - Originally HPI

нетто: 2743,29 PLN

WH 5WHP2/96639POC

БЕТА-ЭКВИВАЛЕНТ ДЛЯ

Описание - POCLAIN -60396639
TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLS **POCLAIN -60396639
TANDEM HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLS **
Manufactured by WHP. Delivery approximately 2-3 days.
POCLAIN

Producent - Originally HPI

нетто: 2895,27 PLN

WH 5WHP2/98600DEU

ЗАМЕНА ДЛЯ: 245398600

Описание - HYDRAULIC GEAR PUMP
DEUTZ FAHR

Producent - Originally Bosch

нетто: 2591,31 PLN

WH 5WHP3/00346HAL

ЗАМЕНА ДЛЯ: 1800346

Описание - TRIPLE HYDRAULIC GEAR PUMP
(Length from face of flange to end
of pump = 216 mm)TRIPLE HYDRAULIC GEAR PUMP
(Length from face of flange to end
of pump = 216 mm)
Replacement pump manufactured by WHP. Delivery time 2-3 days,
Schaeff

Producent - Originally HALDEX BARNES

нетто: 3655,18 PLN

WH 5WHP3/07012HIT

ЗАМЕНА ДЛЯ: 307012-8250

ЗАМЕНА ГИДРАВЛИЧЕСКОГО ШЕСТЕРНЕННОГО НАСОСА

Описание - ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС

Producent - Originally HITACHI

нетто: 3655,18 PLN

WH 5WHP3/08300JCB

ТРОЙНОЙ ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС *

Описание - FOR TRIPLE REXROTH PUMP: 08300286
LENGTH FROM FACE OF FLANGE TO END
OF REAR COVER =FOR TRIPLE REXROTH PUMP: 08300286
LENGTH FROM FACE OF FLANGE TO END
OF REAR COVER =
Manufactured by WHP. Delivery approximately 2-3 days.
JCB

Producent - Originally REXROTH

нетто: 3655,18 PLN

WH 5WHP3/100H271

Наличие: доступный (количество: 19) , 7 dni

Описание - 28 CC/REV + 27 CC/REV + 13 CC/REV
3 SIDE INLETS: 1" BSP
3 SIDE OUTLETS: 3/4" BSP28 CC/REV + 27 CC/REV + 13 CC/REV
3 SIDE INLETS: 1" BSP
3 SIDE OUTLETS: 3/4" BSP
Manufactured by WHP. Delivery time approximately 2-3 days.

нетто: 5175,01 PLN

WH 5WHP3/15600SHF

ТРОЙНОЙ НАСОС ДЛЯ SCHAEFF

Наличие: доступный (количество: 12) , 7 dni

Описание - ZFFFS11/11+11+8BR201UZ (0510565065)
Length from face of flange
to end of pump =ZFFFS11/11+11+8BR201UZ (0510565065)
Length from face of flange
to end of pump =
Manufactured by WHP. Delivery approximately 2-3 days.
Schaeff:

Producent - Originally BOSCH REXROTH: 0510565065

нетто: 3655,18 PLN

WH 5WHP3/15700KOM

УЛЬТРА № 9531B / 7295Y

Описание - BETA EQUIVALENT **
(FROM FACE OF MOUNTING FLANGE TO
END COVER 220MM. PLUS SHAFT
STANDOUT IS 255MM)
TRIPLE HYDRAULIC GEAR PUMPBETA EQUIVALENT **
(FROM FACE OF MOUNTING FLANGE TO
END COVER 220MM. PLUS SHAFT
STANDOUT IS 255MM)
TRIPLE HYDRAULIC GEAR PUMP
Manufactured by WHP. Delivery approximately 2-3 days.
Komatsu: 20M-60-84100

Producent - Originally PARKER, ULTRA: 9531B , 7295Y

нетто: 3655,18 PLN

WH 5WHP3/20127TER

ТРОЙНОЙ НАСОС TEREX: 9520127

Описание - *** STORES TAKE PHOTO PLEASE ****** STORES TAKE PHOTO PLEASE ***
Manufactured by WHP. Delivery approximately 2-3 days.
TEREX POWERSCREEN

Producent - Originally HYDRECO

нетто: 14142,01 PLN

WH 5WHP3/201920CAT

БЕТА ЗАМЕНА ДЛЯ

ЗАМЕНА ДЛЯ: YPT2A8.8.8A2H9-R84

Описание - CATERPILLAR PART NO: 201-0920
(length from face of the flange to
back of end cover = approx. 232 mm)
TRIPLE HYDRAULIC GEAR PUMPCATERPILLAR PART NO: 201-0920
(length from face of the flange to
back of end cover = approx. 232 mm)
TRIPLE HYDRAULIC GEAR PUMP
Manufactured by WHP. Check length of original unit. This unit is 232 mm from face of flange to back of end cover.
Delivery time approximately 2-3 days.
CATERPILLAR, CAT: 03018KBFA03320, 03037U/006-159, 201-0920

Producent - WHP equivalent for Haldex: 201-0920

нетто: 3655,18 PLN

WH 5WHP3/21847TAK

Описание - TRIPLE HYDRAULIC GEAR PUMPTRIPLE HYDRAULIC GEAR PUMP
Replacement pump manufactured by WHP. Delivery time approx. 2-3 days.
Takeuchi

Producent - Originally SHIMADZU

нетто: 4111,14 PLN

WH 5WHP3/22131HAN

ЗАМЕНА ДЛЯ: PBBB222RK131

ЗАМЕНА WHP НА 2ISP27691GFD

Описание - HYDRAULIC GEAR PUMPHYDRAULIC GEAR PUMP
Equivalent pump manufactured by WHP. Delivery time approx. 2-3 days.
HANIX

Producent - Originally NIHON SPINDLE

нетто: 3655,18 PLN

WH 5WHP3/30528KOM

Описание - WITH SEALED SECTIONS
Length from face of flange
to end of pump =279MMWITH SEALED SECTIONS
Length from face of flange
to end of pump =279MM
Manufactured by WHP. Delivery approximately 2-3 days.
Komatsu: 70541R2851, 840120007

Producent - Originally IOTTI STROZZI/DAVID BROWN: 2ISP27691GFD

нетто: 4111,14 PLN

WH 5WHP3/31060HAY

ЗАМЕНА ДЛЯ: 3349131060

Описание - TANDEM HYDRAULIC GEAR PUMP
** Customer must fit their old
relief valve to this replacement
pump **
** STORES TAKE PHOTO PLEASE **TANDEM HYDRAULIC GEAR PUMP
** Customer must fit their old
relief valve to this replacement
pump **
** STORES TAKE PHOTO PLEASE **
Manufactured by WHP from genuine Parker parts. Delivery time approx. 2-3 days.
** PLEASE NOTE: CUSTOMER NEEDS TO USE THEIR OLD RELIEF VALVE & FIT IT TO THIS REPLACEMENT PUMP. IT DOES NOT COME WITH A RELIEF VALVE **
Hayter

Producent - Originally PARKER

нетто: 6991,67 PLN

WH 5WHP3/40000MAN

МАНИТУ 197297 4044J

ТРОЙНОЙ ЭКВИВАЛЕНТНЫЙ ГИДРАВЛИЧЕСКИЙ ПРИВОД

Описание - HYDRAULIC GEAR PUMP
SHORTER THAN ORIGINAL)
to end of pump =322mmHYDRAULIC GEAR PUMP
SHORTER THAN ORIGINAL)
to end of pump =322mm
Manufactured by WHP. Delivery approximately 2-3 days.
Manitou: 197297 703612 703613 197297, 190227H4144

Producent - Originally ULTRA: 4044J 8695

нетто: 5402,99 PLN

WH 5WHP3/40010KUB

Описание - PUMP FOR BOSCH No. 0510365013
Length from face of flange
to end of pump =259mmPUMP FOR BOSCH No. 0510365013
Length from face of flange
to end of pump =259mm
White House Products Equivalent pump

For Kubota Mini Excavators please be certain that the pump is required for a European Built machine. This pump will not fit a far Eastern built machine. NOT for use on KX71-2

For Kubota Mini Excavators please be certain that the pump is required for a European Built machine. This pump will not fit a far Eastern built machine.
NOT for use on KX71-2
Manufactured by WHP. Delivery approximately 2-3 days.
Yanmar, Kubotoa:

Producent - Originally BOSCH REXROTH: 0510365013

нетто: 3655,18 PLN

WH 5WHP3/40011JAC

ЗАМЕНА WHP ДЛЯ: 68263498

ГИДРАВЛИЧЕСКИЙ ШЕСТЕРЕНЧАТЫЙ НАСОС, ЭКВИВАЛЕНТНЫЙ WHP

Описание - PLP20.8-07S1-LOC/20.8-LOD/OC/20.8-L
ТРОЙНОЙ ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС
**МАГАЗИНЫ, СДЕЛАЙТЕ ФОТО, ПОЖАЛУЙСТА** ДЖЕЙКОБСОН

Producent - Originally Casappa

нетто: 3655,18 PLN

WH 5WHP3/40011KUB

БЕТА-ЭКВИВАЛЕНТ № 0510565079

Описание - to BOSCH No. 0510565058 **
Length from face of flange
to end of pump =279MMto BOSCH No. 0510565058 **
Length from face of flange
to end of pump =279MM
Manufactured by WHP. Delivery approximately 2-3 days.
KUBOTA/CASE: 68391 - 61110

Producent - Originally Bosch: 0510565058, ZFFS11/11+7BZR2351

нетто: 3655,18 PLN

WH 5WHP3/40012KUB

Описание - (Note: BETA PUMP IS EST 280mm FROM
FACE OF MOUNT FLANGE TO THE END
OF THE REAR COVER)
TRIPLE HYDRAULIC GEAR PUMP(Note: BETA PUMP IS EST 280mm FROM
FACE OF MOUNT FLANGE TO THE END
OF THE REAR COVER)
TRIPLE HYDRAULIC GEAR PUMP
Equivalent pump manufactured by WHP. Delivery time appox. 2-3 days
** Note that the original Bosch unit was 270 mm from face of mounting flange to end of rear cover and this pump is 279.7 mm**
Kubota:

Producent - Originally Bosch: 0510565079

нетто: 3655,18 PLN

WH 5WHP3/40014CAS

ЗАМЕНА ДЛЯ: 68268625

ЗАМЕНА НА BOSCH 0510365015

Описание - TRIPLE HYDRAULIC GEAR PUMP

нетто: 3655,18 PLN

WH 5WHP3/40014KUB

Описание - *Note This Unit Is 45mm Longer Than
Original Bosch Unit **
(Beta pump = 217mm - flange to end)
THE BETA PUMP IS 5 + 8 + 8cc/rev
Suitable For Flexible Hoses Only*Note This Unit Is 45mm Longer Than
Original Bosch Unit **
(Beta pump = 217mm - flange to end)
THE BETA PUMP IS 5 + 8 + 8cc/rev
Suitable For Flexible Hoses Only
Our WHP equivalent to replace 0510365015.Please note our pump is 45mm longer than the original. Also our pump is 5+8+8cc/rev.The old pump was 4.6+6.5+6.5cc/rev.

Manufactured by WHP. Delivery time approximately 2-3 days.
Length from face of flange to end cover = 217 mm
Kubota: RB201-61110, RG10861112, RG10861110, RG10961110

Producent - Originally KAYABA, Casappa, BOSCH: KFP11 64-64-43CS, 68268625, 0510365015, 1518222477, 1518222478, 1518222479

нетто: 3655,18 PLN

WH 5WHP3/40014KUBC

ЗАМЕНА НАСОСА CASAPPA

ЭКВИВАЛЕНТ BOSCH 0510565059

Описание - No. 68268625
*Suitable For Flexible Hoses Only*
* NOTE THIS UNIT IS 45mm LONGER*
(Beta pump = 217mm - flange to end)
THE BETA PUMP IS 5 + 8 + 8cc/rev

нетто: 3450,00 PLN

WH 5WHP3/40015KUB

WHP ЭКВИВАЛЕНТ BOSCH 0510565059

Описание - HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump =225mmHYDRAULIC GEAR PUMP
Length from face of flange
to end of pump =225mm
This build pump is replacement for the
5B3/4005KUB BOSCH 0510565059 VERY SLIGHTLY SHORTER THAN ORIGINAL

Length from face of flange to end of pump =225mm
Please allow approximately 2 days to manufacture this pump.

Kubota: 6974161110

Producent - Originally Bosch: 0510565059

нетто: 3655,18 PLN

WH 5WHP3/40016KUB

ЗАМЕНА WHP ДЛЯ: 5HP3/40029PEL

Описание - ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС
Длина от поверхности фланца
до конца насоса = 225 мм

нетто: 3655,18 PLN

WH 5WHP3/40029PEL

ЭКВИВАЛЕНТ БЕТА ДЛЯ ЗАМЕНЫ

Описание - TRIPLE HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump = 233 mmTRIPLE HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump = 233 mm
Equivalent triple gear pump manufactured by WHP. Delivery approx. 2-3 days.
Peljob: E5350068, E5350089, E5350088

Producent - Originally HPI: A4006537, 61239884, 51183005, 61244046, P1AAN2010HA2010HA2008HL30A01N, 60720844

нетто: 3655,18 PLN

WH 5WHP3/40077PEL

ЗАМЕНА ДЛЯ КОРПУСА 6010233M91

Описание - PUMP No. 550/1/33616 (5S3/40077PEL)
Length from face of flange
to end of pump = 215 mmPUMP No. 550/1/33616 (5S3/40077PEL)
Length from face of flange
to end of pump = 215 mm
Manufactured by WHP, Delivery approximately 2-3 days.
Peljob: E5350056

Producent - Originally SUNDSTRAND: 550133616

нетто: 3655,18 PLN

WH 5WHP3/40079CAS

Описание - & 47042108 & 550136641 (БЕТА)
ТРОЙНОЙ ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС
***МАГАЗИНЫ, СДЕЛАЙТЕ ФОТО, ПОЖАЛУЙСТА***

нетто: 3655,18 PLN

WH 5WHP3/40082KOM

ЗАМЕНА ДЛЯ КАСАППЫ

БЕТА ЗАМЕНА ТРОЙНОЙ НАСОС SALAMI

Описание - PLP20 68263690 840270022
TRIPLE HYDRAULIC GEAR PUMP
2 INLETS & 3 OUTLETS
290mm TOP OF SHAFT TO BACK COVERPLP20 68263690 840270022
TRIPLE HYDRAULIC GEAR PUMP
2 INLETS & 3 OUTLETS
290mm TOP OF SHAFT TO BACK COVER
Manufactured by WHP. Delivery time approximately 2-3 days.

Please check the length of the shaft. This pump is exactly the same as 5WHP3/40083KOM except for the differences in shaft standout:

5WHP3/40082KOM = 58mm
5WHP3/40083KOM = 38mm
Komatsu

Producent - Originally Casappa

нетто: 3655,18 PLN

WH 5WHP3/40083KOM

KOMATSU 840120016 ТРОЙНОЙ НАСОС

Описание - SALAMI ORIGINAL PART NUMBER
2PB10.5/10.5/8.30 - 612293922
2 INLETS & 3 OUTLETS
235mm TOP OF FLANGE TO BACK COVER
290mm TOP OF SHAFT TO BACK COVERSALAMI ORIGINAL PART NUMBER
2PB10.5/10.5/8.30 - 612293922
2 INLETS & 3 OUTLETS
235mm TOP OF FLANGE TO BACK COVER
290mm TOP OF SHAFT TO BACK COVER
Manufactured by WHP. Delivery time approximately 2-3 days.

Please check the length of the shaft. This pump is exactly the same as 5WHP3/40082KOM except for the differences in shaft standout:

5WHP3/40082KOM = 58mm
5WHP3/40083KOM = 38mm
Komatsu: 70541R2001, 61229392, 181.20.357.00

Producent - Originally SALAMI, CASAPPA: 2PB10.5/10.5/8.3, 181.20.357.00, 68263690

нетто: 3655,18 PLN

WH 5WHP3/40084KOM

ЭКВИВАЛЕНТ БЕТА ДЛЯ ЗАМЕНЫ CASAPPA

Описание - HYDRAULIC GEAR PUMP
** Length of Original = 167mm. This
to end of pump =240mmHYDRAULIC GEAR PUMP
** Length of Original = 167mm. This
to end of pump =240mm
Manufactured by WHP. Delivery approximately 2-3 days.
Komatsu: 840120016

Producent - Originally IOTTI STROZI / CASAPPA: 68263700

нетто: 3655,18 PLN

WH 5WHP3/40100YAN

ЗАМЕНА ГИДРАВЛИЧЕСКОГО ШЕСТЕРНЕННОГО НАСОСА

Описание - TRIPLE PUMP No. 6760770
Length from face of flange
to end of pump = 216MM
HYDRAULIC GEAR PUMPTRIPLE PUMP No. 6760770
Length from face of flange
to end of pump = 216MM
HYDRAULIC GEAR PUMP
This is an equivalent pump manufactured by WHP. Delivery time approx. 2-3 days.
Yanmar: 03717R

Producent - Originally Casappa: 67607700, PLP20.6.3/C1S1/LOC/ ??? + PLP20.7.2LOS/LOC OF/OCS7 V1FS + PLP20.7.2DOS7C/LOCS7/V/DECP, PLP20.6.3/C1S1/LOC/20.7.2/LOF/OC/20.7.2/LOC/S7/V/D/SSEL AV/MNS(YAN)

нетто: 3655,18 PLN

WH 5WHP3/40138JCB

Описание - FOR ULTRA No. 8633Z ** NOT SUITABLE
FOR MACHINES WITH STEEL PIPES **
233mm FROM TOP OF FLANGE
272mm FROM TOP OF SHAFTFOR ULTRA No. 8633Z ** NOT SUITABLE
FOR MACHINES WITH STEEL PIPES **
233mm FROM TOP OF FLANGE
272mm FROM TOP OF SHAFT
GEAR PUMP

A WHP Manufactured Replacement. Delivery time approximately 2-3 days.
JCB: 20/916000

Producent - Originally PARKER, ULTRA: 3349131112, 8633Z, 8033578

нетто: 3655,18 PLN

WH 5WHP3/40142JCB

ЭКВИВАЛЕНТ БЕТА

БЕТА-ЭКВИВАЛЕНТ СТАРОЙ УЛЬТРА /

Описание - TRIPLE PUMP
Length from face of flange
to end of pump =

нетто: 3564,47 PLN

WH 5WHP3/40143JCB

Описание - PARKER PUMP No. 8886Z + 6285F
Length from face of flange
to end of pump =204mmPARKER PUMP No. 8886Z + 6285F
Length from face of flange
to end of pump =204mm
REPLACEMENT PUMP FOR THE ULTRA 8886Z TRIPLE PUMP
1PX050C1J8B1B1-160-SA_1PX055J3J8B1B1-250-LA_1PX055C1J8B1B1-250-SA-CT1S1N

Manufactured by WHP. Delivery approximately 2-3 days.
JCB: 20/917000, 20/907500

Producent - ПАРКЕР

Код сравнения - 8886,

нетто: 3655,18 PLN

WH 5WHP3/40210ATL

ЗАМЕНА WHP БЕТА ДЛЯ

Описание - ПАРКЕР Нет. 82220
ТРОЙНОЙ ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС
** Магазины, где можно сфотографироваться **

нетто: 3655,18 PLN

WH 5WHP3/40259JCB

ДЖКБ 5379Б 334913105

Описание - BETA TRIPLE PUMP
Length from face of flange
to end of pump = 230 mmBETA TRIPLE PUMP
Length from face of flange
to end of pump = 230 mm
Equivalent pump manufactured by WHP. Delivery time approximately 2-3 days.
JCB:

Producent - Originally ULTRA: 5379B, 9601, 3349131058, PGP511B0070CS2H2NB1D4C511B0110XD6D, 4C511A0110XB1D4B1B1,

нетто: 3655,18 PLN

WH 5WHP3/40268ULT

ЗАМЕНА WHP НА 4531Y

Описание - TRIPLE PUMP
** STORES TAKE PHOTO PLS **TRIPLE PUMP
** STORES TAKE PHOTO PLS **
Manufactured by WHP. Delivery approximately 2-3 days.
Dynapac:

Producent - ПАРКЕР

нетто: 3655,18 PLN

WH 5WHP3/40269JCB

ЗАМЕНА НА 550131910

БЕТА-ЭКВИВАЛЕНТ УСТАРЕВШЕГО ULTRA

Описание - TRIPLE HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump =202mmTRIPLE HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump =202mm
This is a White House Products equivalent pump for 5U3/40269ULT. It has 3 Inlet ports.
Please allow approx. 2 days for manufacture.
JCB HYDRAPOWER: 20/300800, 20/204800, 20/204100, 231/98210

Producent - Originally ULTRA / SAUER: 550131910, 1PL0101PL0151PL015C, 8626, 4129, 4129A, C4/5.5/5.5L 30645, CTSJJJBN (OLD No. 0501Y)

нетто: 3655,18 PLN

WH 5WHP3/40271ULT

Описание - HYDRAULIC GEAR PUMP no. 3985W
Length from face of flange
to end of pump =328mm
MANITOU O.E.M No:189448HYDRAULIC GEAR PUMP no. 3985W
Length from face of flange
to end of pump =328mm
MANITOU O.E.M No:189448
Gear Pump

Manufactured by WHP. Delivery approximately 2-3 days.
Manitou: 189448

Producent - Originally PARKER: 3985W

нетто: 4567,08 PLN

WH 5WHP3/41001JD

ЗАМЕНА ДЛЯ: AZ49120

ЗАМЕНА WHP НА 307012-8170

Описание - ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ НАСОС
*** МАГАЗИНЫ СДЕЛАЙТЕ ФОТО, ПОЖАЛУЙСТА *** John Deere

Producent - Originally Bosch

нетто: 4111,14 PLN

WH 5WHP3/41214KUB

Описание - KUBOTA 307012-8170
*** THE BETA PUMP IS 292mm FROM THE
FACE OF FLANGE TO END OF PUMP. ***KUBOTA 307012-8170
*** THE BETA PUMP IS 292mm FROM THE
FACE OF FLANGE TO END OF PUMP. ***
Manufactured by WHP. Delivery time approximately 2-3 days.
CASE, KUBOTA: 68671-61110, 56202N

Producent - Originally ZEXEL, HITACHI, DIESEL KIKI: 307012-8170, 9218042, 77212, 89216, 76718

нетто: 3655,18 PLN

WH 5WHP3/41215KUB

ЗАМЕНА 5Z3/41215KUB

Описание - ** UNIT UNSEALED **
Length from face of flange
to end of pump =240MM** UNIT UNSEALED **
Length from face of flange
to end of pump =240MM
Manufactured by WHP. Please note this is an un-sealed unit. Delivery approximately 2-3 days.
KUBOTA, CASE: 68651-61110, 46804N

Producent - Originally BOSCH, ZEXEL: 0510565064, ZFFFS11/13+13+8BZR2351, 307012-8160, 9218041

нетто: 3655,18 PLN

WH 5WHP3/41216KUB

ЗАМЕНА НА ZEXEL

Наличие: доступный (количество: 17) , 7 dni

Описание - 9218029 / 307012-1091
** Length from face of flange to
end of pump = 235 mm **
HYDRAULIC GEAR PUMP9218029 / 307012-1091
** Length from face of flange to
end of pump = 235 mm **
HYDRAULIC GEAR PUMP
Replacement pump manufactured by WHP. Delivery time approximately 2-3 days
Kubota

Producent - ZEXEL, DIESEL KIKI, HITACHI

нетто: 3655,18 PLN

WH 5WHP3/41217KUB

ЗАМЕНА ДЛЯ: 307012-1000

Описание - (Was 5Z3/41217KUB)
TRIPLE HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **(Was 5Z3/41217KUB)
TRIPLE HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Replacement pump manufactured by WHP. Delivery time approx. 2-3 days
Kubota

Producent - Originally ZEXEL

нетто: 3655,18 PLN

WH 5WHP3/41220KIK

ЗАМЕНА ДЛЯ: ЗУБЧАТЫЙ НАСОС ZEXEL

БЕТА-ЭКВИВАЛЕНТ ДЛЯ 307012-0041/42

Описание - *** STORES TAKE PHOTO PLEASE ***
Length from face of flange to end
of pump =
9218038. 307012-8121/8120*** STORES TAKE PHOTO PLEASE ***
Length from face of flange to end
of pump =
9218038. 307012-8121/8120
Manufactured by WHP. Delivery approximately 2-3 days.
Kobelco

Producent - Originally ZEXEL

нетто: 3731,18 PLN

WH 5WHP3/42000TAK

БЕТА-ЭКВИВАЛЕНТ 5S3/45020NIS

Описание - ** WILL ONLY FIT MACHINE WITH
FLEXIBLE HOSE CONNECTIONS TO PORTS
TRIPLE HYDRAULIC GEAR PUMP** WILL ONLY FIT MACHINE WITH
FLEXIBLE HOSE CONNECTIONS TO PORTS
TRIPLE HYDRAULIC GEAR PUMP
Unit is manufactured by WHP. Delivery time approximately 2-3 days.
Takeuchi

Producent - Originally DIESEL KIKI, HITACHI

нетто: 3655,18 PLN

WH 5WHP3/45020NIS

БЕТА-ЭКВИВАЛЕНТ ДЛЯ 5K3/46000KOM

Описание - Length from face of flange
to end of pump =
**STORES PLEASE TAKE PHOTO**Length from face of flange
to end of pump =
**STORES PLEASE TAKE PHOTO**
Manufactured by WHP. Delivery approximately 2-3 days.
HANIX

Producent - Originally SAUER SUNDSTRAND

нетто: 3655,18 PLN

WH 5WHP3/46000KOM

НАСОС ГИДРАВЛИЧЕСКИЙ ЗУБЧАТЫЙ NISSAN 10

Описание - PLEASE SEE NOTE ON DATABASE
ABOUT PORTS ON REAR SECTION
BEFORE ACCEPTING AN ORDER
FOR THIS PUMP
** STORES PLS TAKE PHOTO **PLEASE SEE NOTE ON DATABASE
ABOUT PORTS ON REAR SECTION
BEFORE ACCEPTING AN ORDER
FOR THIS PUMP
** STORES PLS TAKE PHOTO **
Manufactured by WHP. Delivery approximately 2-3 days.
Komatsu

Producent - Originally KAYABA

нетто: 3655,18 PLN

WH 5WHP3/47005NIS

ЭКВИВАЛЕНТ БЕТА - НАСОС CASAPPA

Описание - KRP4-12-12-7CD - 20120-59901
Length from face of flange
to end of pump = *****

нетто: 3655,18 PLN

WH 5WHP3/50127CAS

Описание - NO. 67617482 / PELJOB NO. E5350127
Length from face of flange
to end of pump =218mm
HYDRAULIC GEAR PUMPNO. 67617482 / PELJOB NO. E5350127
Length from face of flange
to end of pump =218mm
HYDRAULIC GEAR PUMP
GEAR PUMP

This unit is manufactured by WHP. Delivery time approximately 2-3 days.
Peljob: E5350127

Producent - Originally Casappa: 67617482

нетто: 3655,18 PLN

WH 5WHP3/50128CAS

БЕТА-ЭКВИВАЛЕНТ CASAPPA

БЕТА-ЭКВИВАЛЕНТ ДЛЯ ATLAS: 6000331

Описание - NO. 67612600 / PELJOB NO. E5350109
Length from face of flange
to end of pump =218m
TRIPLE HYDRAULIC GEAR PUMPNO. 67612600 / PELJOB NO. E5350109
Length from face of flange
to end of pump =218m
TRIPLE HYDRAULIC GEAR PUMP
Original unit is Volvo OEM Special.
This unit is manufactured by WHP. (Delivery time approximately 2-3 days). It is approximately 40mm shorter than the original.
VOLVO, PELJOB

Producent - Originally Casappa

нетто: 3655,18 PLN

WH 5WHP3/60003ATL

Описание - (BOSCH No. 0517 565 003)
** STORES PLS TAKE PHOTO **(BOSCH No. 0517 565 003)
** STORES PLS TAKE PHOTO **
Manufactured by WHP. Delivery approximately 2-3 days.
ATLAS

Producent - Originally Bosch

нетто: 3655,18 PLN

WH 5WHP3/62768BOB

ЗАМЕНА ДЛЯ: 6662768

Описание - HYDRAULIC GEAR PUMP
** STORES TAKE PHOTO PLEASE **
Bobcat

нетто: 2853,17 PLN

WH 5WHP3/65010TER

БЕТА-ЭКВИВАЛЕНТ BOSCH

Описание - 0517565010
HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump = 235 mm0517565010
HYDRAULIC GEAR PUMP
Length from face of flange
to end of pump = 235 mm
Manufactured by WHP. Delivery approximately 2-3 days.
Terex: R918C03833

Producent - Originally REXROTH: 0517565010

нетто: 3655,18 PLN

WH 5WHP3/65070BOS

ЗАМЕНА НАСОСА ДЛЯ BOSCH:

6665107 / 6663954 ТРОЙНОЙ ГИДРАВЛИЧЕСКИЙ

Описание - 0510565070 / 0517565004
Length from face of flange
to end of pump =0510565070 / 0517565004
Length from face of flange
to end of pump =
GEAR PUMP

Manufactured by WHP. Delivery approximately 2-3 days.
SHAEFF:

Producent - Originally BOSCH REXROTH: 0510565070, 0517565004

нетто: 3655,18 PLN

WH 5WHP3/65107BOB

БЕТА-ЗАМЕНА ДЛЯ: D45166100

Описание - GEAR PUMP (Bobcat)GEAR PUMP (Bobcat)
Manufactured by WHP. Delivery approximately 2-3 days.
Bobcat

Producent - Originally HALDEX BARNES

нетто: 3655,18 PLN

WH 5WHP3/66100MF

БЕТА-ЭКВИВАЛЕНТ BOBCAT: 6662769

Описание -
** STORES TAKE PHOTO PLS **
** STORES TAKE PHOTO PLS **
Manufactured by WHP. Delivery approximately 2-3 days.
MASSEY FERGUSON / DRONNINGBORG

Producent - Original SALAMI

нетто: 3655,18 PLN

WH 5WHP3/66627BOB

Наличие: доступный (количество: 32) , 7 dni

Описание - (Length from face of MTG Flange to
end of Rear cover = 246 mm(Length from face of MTG Flange to
end of Rear cover = 246 mm
Manufactured by WHP. Delivery approximately 2-3 days.
Bobcat

Producent - Originally BARNES

нетто: 3655,18 PLN

WH 5WHP3/66643BOB

ЗАМЕНА БЕТА 6664309

BOBCAT 6676970 ТРОЙНОЙ ГИДРАВЛИЧЕСКИЙ

Описание - TRIPLE HYDRAULIC GEAR PUMP
Bobcat

Producent - Originally JOHN S BARNES / HALDEX

нетто: 3655,18 PLN

WH 5WHP3/66769BOB

Наличие: доступный (количество: 32) , 7 dni

Описание - GEAR PUMP - Length from face of
flange to end of pump =264.3mm
* see database *GEAR PUMP - Length from face of
flange to end of pump =264.3mm
* see database *
Manufactured by WHP. Delivery time approximately 2-3 days.
Length from face of flange to end of pump = 264.3 mm.

This pump is NOT interchangeable with 6672074
Bobcat

Producent - Originally HALDEX

нетто: 5190,21 PLN

WH 5WHP3/66778BOB

ЭКВИВ БЕТА КАССАПА 6677829