Hydraulic Pumps

Casappa LVP 30D-04S5-PMD / QB-N-LS2 (GNF) O-ring

Product code 21009264

Availability: Currently not available

Notify me about availability

Product features:

• net: 0,91 PLN
• • Currency: zł € $

Casappa PLP20.20-03S1 / 20.11,2 / 20.9 D / FS gear pump

Product code 21010234

Availability: Currently not available

Notify me about availability

Product features:

• net: 3814,00 PLN
• • Currency: zł € $

Rear cover of CASSAPA pump (PLP20)

Product code 21011573

Availability: Currently not available

Notify me about availability

Product features:

• net: 525,76 PLN
• • Currency: zł € $

ALHP2-B0-X-12-T0-L1 gear pump; Marzocchi replacement

Product code 21011901

Availability: Currently not available

Notify me about availability

Product features:

Producent - Marzocchi

Seria pompy - ALHP2

Pump type - toothed

Working volume - 12 cm3 / rev

Turning direction - Right

Max. working pressure (continuous) - 270 bar

Flange type - 96/71.5mm, 4 bolts

Spacing of mounting holes - 71,5x96 mm

Centering diameter - 36,5 mm

Roller type - Conical 1:8

Description -

Gear pump ALHP2-B0-X-12-T0-L1 European flange mounted with 4 screws Mounting bolt spacing 71.5/96mm

• net: 357,14 PLN
• • Currency: zł € $

Casappa pump fitting group 3/2

Product code 21013075

Availability: Currently not available

Notify me about availability

Product features:

Producent - Casappa

Comparison code - 21019297

• net: 723,30 PLN
• • Currency: zł € $

Drive shaft PL30.46-A8-6

Product code 21013969

Availability: Currently not available

Notify me about availability

Product features:

Description - CASAPPA hydraulic pump drive shaft

• net: 623,66 PLN
• • Currency: zł € $

SEAL KIT SNP3 / 0607

Product code 211.25.002.0K

Availability: Currently not available

Notify me about availability

Product features:

• net: 131,03 PLN
• • Currency: zł € $

Hydraulic pump Meiller 2x38L

Product code 215-101

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Double-stream piston

Working volume - 2x38 cm3 / rev

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35.7

Compressing port - M24x1.5

Suction port - M45x2

Comparison code - 215/101, 0215 2001 101, 02152001101

• net: 8827,86 PLN
• • Currency: zł € $

CAPRONI 3-sec gear pump / Replacement for Bosch Rexroth 0510565432 pump

Product code 222A14/4,5X947/C8,2X097

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 14 + 4 + 11 cm3 / rev

Turning direction - Left

Max. working pressure (continuous) - 250 bar

Roller type - Spline - 9 teeth

Pump type - toothed

Producent - Caproni

Description -

CAPRONI 3-section gear pump

Equivalent to Rexroth pump 0510565432 AZPFFF-11-014/004/011LFP202020PB-S0195

Flange mounted with 2 screws

• net: 1760,94 PLN
• • Currency: zł € $

Caproni 222C15X259 gear pump

Product code 222C15X259

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 14+14+8 cm3/rev

Turning direction - Right

Max. working pressure (continuous) - 250 bar

Pump type - Triple gear

Producent - Caproni

Description - 3-section hydraulic pump for KUBOTA KX101, KX151, EX151, HX040, KZ040, CASE CK36 CK50 excavators

Comparison code - 3070128160, 3070128170, 0510565064

• net: 2500,00 PLN
• • Currency: zł € $

Caproni 3-section hydraulic pump / Bosch Rexroth pump replacement

Product code 222C16X095T625BV709S

Availability: Currently not available

Notify me about availability

Product features:

Turning direction - Right

Pump type - toothed

Producent - Caproni

Description - Caproni 3-section gear pump / Bosch Rexroth pump replacement AZPSFF-12-011 / 016 / 008RCP202020KB-S0014 Flange mounted with 2 screws ⌀50 mm Conical shaft 1: 5

HOLLOW SHAFT

Product code 225607

Availability: Currently not available

Notify me about availability

Product features:

HOLLOW SHAFT

Product code 225649

Availability: Currently not available

Notify me about availability

Product features:

2265-129 SHAFT (CODE 5)

Product code 2265-129

Availability: Currently not available

Notify me about availability

Product features:

CAPRONI 2-sec gear pump tandem / Bosch Rexroth pump replacement 0510565387

Product code 22A10/6,3X097

Availability: Currently not available

Notify me about availability

Product features:

Turning direction - Left

Centering diameter - 50 mm

Roller type - Stożkowy 1:5

Pump type - toothed

Producent - Caproni

Description - Pompa hydrauliczna dwusekcyjna przeznaczona do ciągników: Case IH

Case seria: C;
C42 C48 C50 C55 C58 C60 C64 C70 C80 C90 C100
Case seria: CS;
CS48 CS52 CS58 CS63 CS68 CS75 CS78 CS80 CS86 CS90 CS94 CS98 CS100 CS110 CS120 CS130 CS150
Case seria: 56;
856 956 1056

Zamiennik pompy Bosch Rexroth 0510565387

Ilość śrub montażowych: 2
Rozstaw śrub montażowych: 85mm

Comparison code - 0510565387, 0 510565387, 0 510 565 387

• net: 885,71 PLN
• • Currency: zł € $

Gear hydraulic pump

Product code 22A16X095

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 11 cm3 / rev

Max. working pressure (continuous) - 250 bar

Pump type - toothed

Description - CAPRONI hydraulic pump - replacement for BOSCH 0510515323 Number of mounting holes: 4 Shaft cone size: 1: 5 Diameter of screw connection pressure connection: 35 mm Diameter of screw connection of section connection: 40 mm Installation diameter: 50 mm

• net: 560,00 PLN
• • Currency: zł € $

CAPRONI 2-sec gear pump tandem

Product code 22A19/11X709S

Availability: Currently not available

Notify me about availability

Product features:

• net: 1024,29 PLN
• • Currency: zł € $

Hydraulic pump replacement for NEW HOLLAND 87472285

Product code 22A25HD/14X734

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 22 + 14 cm3 / rev

Description - Hydraulic Pump Replacement for NEW HOLLAND 87472285 Flange: 50mm Mounting Bolt Spacing 88x95mm (130mm) Shaft: 16mm, 9 Teeth Application: New Holland: T4.F: T4.75F, T4.85F, T4.95F, T4.105F T4.LP : T4.75LP, T4.85LP T4.NV: T4.65V, T4.75N, T4.75V, T4.85N, T4.85V, T4.95N, T4.95V, T4.105V T4 .: T4.55, T4.65, T4.75 T4000: T4020, T4030 TD4000F: TD4.70F, TD4.80F, TD4.90F, TD4020F, TD4030F, TD4040F TD5 .: TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, TD5.115 TD5000: TD5010, TD5020, TD5030 Case: Farmall: 55C, 65A, 65C, 75A, 75C, 85A, 95A, 105A, 115A JX: JX60, JX70, JX80 QUANTUM C: 65C, 75C QUANTUM F : 75F, 85F, 95F, 105F QUANTUM N: 75N, 85N, 95N, 105N QUANTUM V: 65V, 75V, 85V, 95V, 105V Comparative code: 1517223108 Bosh Rexroth

• net: 1000,00 PLN
• • Currency: zł € $

Caproni gear pump replacement for Rexroth 0510655014

Product code 22C19X976LVB20K

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 19 + 5 cm3 / rev

Turning direction - Right

Max. working pressure (continuous) - 250 bar

Pump type - toothed

Producent - Caproni

Description -

2-section pump, equivalent to Rexroth 0510655014. Cone shaft 1:5. Flange mounted with 4 screws. Mounting bolt spacing 72/100mm. Side ports. Square connection, bolt spacing 30mm.

Comparison code - 0510 655 014, 0510655014, AZPFF-12-019/005RSG2020MB

• net: 1628,57 PLN
• • Currency: zł € $

SMV2 / 089 - B3A-063-MS3535X-VML311-A1

Product code 23-4801AA- JFBJ

Availability: Currently not available

Notify me about availability

Product features:

Piston pump Sunfab SAP-012L-N-DL4-H35-S0S-000 - H35 shaft

Product code 23013

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 12.6cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bars

Flow - 18.9 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9 (H35)

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2159,49 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-017L-N-DL4-L35-S0S-000

Product code 23017

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 17cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bar

Flow - 25.5 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2114,91 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-017L-N-DL4-H35-S0S-000 - H35 shaft

Product code 23018

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 17cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bars

Flow - 25.5 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9 (H35)

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2224,67 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-025L-N-DL4-L35-S0S-000

Product code 23025

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 25.4cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bar

Flow - 38.1 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2179,54 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-025L-N-DL4-H35-S0S-000 - H35 shaft

Product code 23026

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 25.4cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bars

Flow - 38.1 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9 (H35)

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2293,20 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-034L-N-DL4-L35-S0S-000

Product code 23034

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 34.2cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bars

Flow - 51.3 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2244,73 PLN
• • Currency: zł € $

Pompa SAP-034R-N-DL4-L35-S0S-000

Product code 23034R

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 34,2 cm3/obr

Turning direction - Prawy

Seria pompy - SAP

Max. working pressure (continuous) - 400 bar

Flange type - ISO 7653-D

Centering diameter - 80 mm

Roller type - Wielowypust 8x32x34,9

Pump type - Tłoczkowa jednostrumieniowa

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Compressing port - G 3/4"

Suction port - Ø45 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

• net: 2689,03 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-034L-N-DL4-H35-S0S-000 - H35 shaft

Product code 23035

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 34.2cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bar

Flow - 51.3 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9 (H35)

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2361,17 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-040L-N-DL4-L35-S0S-000

Product code 23040

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 41.2cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bars

Flow - 61.8 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2356,71 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-040L-N-DL4-H35-S0S-000 - H35 shaft

Product code 23041

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 41.2cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bars

Flow - 61.8 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9 (H35)

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2478,73 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-047L-N-DL4-L35-S0S-000

Product code 23047

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 47.1cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bar

Flow - 70.6 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2450,87 PLN
• • Currency: zł € $

Sunfab SAP-047R-N-DL4-L35-S0S-000 piston pump

Product code 23047R

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 47,1 cm3/obr

Turning direction - Right

Seria pompy - SAP

Max. working pressure (continuous) - 400 bar

Flow - 70,6 l/min

Flange type - ISO 7653-D

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Pump type - Single-stream piston

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 3057,03 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-047L-N-DL4-H35-S0S-000 - H35 shaft

Product code 23048

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 47.1cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bars

Flow - 70.6 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9 (H35)

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2577,90 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-056L-N-DL4-L35-S0S-000

Product code 23056

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 56cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bar

Flow - 84 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2548,37 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-056L-N-DL4-H35-S0S-000 - H35 shaft

Product code 23057

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 56cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bars

Flow - 84 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9 (H35)

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2680,41 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-064L-N-DL4-L35-S0S-000

Product code 23064

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 63.6cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bar

Flow - 95.4 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Comparison code - 423955, B485-SC064

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 3146,40 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-064L-N-DL4-H35-S0S-000 - H35 shaft

Product code 23065

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 63.6cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bar

Flow - 95.4 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9 (H35)

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 3/4"

Suction port - Ø45 mm

• net: 2787,94 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-084L-N-DL4-L35-S0S-000

Product code 23084

Availability: Currently not available

Notify me about availability

Product features:

Producent - Sunfab

Seria pompy - SAP

Pump type - Single-flow piston type

Working volume - 83.6cc/rev

Flow - 125.4 l/min

Turning direction - Left

Max. working pressure (continuous) - 400 bars

Flange type - ISO 7653-D

Spacing of mounting holes - 80x80 mm

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Compressing port - G 1"

Suction port - Ø58 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

• net: 3618,23 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-084L-N-DL4-H35-S0S-000 - H35 shaft

Product code 23085

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 83.6cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bars

Flow - 125.4 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9 (H35)

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 1"

Suction port - Ø58 mm

• net: 3067,63 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-108L-N-DL4-L35-S0S-000

Product code 23108

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 108cc/rev

Turning direction - Left

Seria pompy - SAP

Max. working pressure (continuous) - 400 bars

Flow - 162 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Pump type - Single-flow piston type

Producent - Sunfab

Spacing of mounting holes - 80x80 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

Compressing port - G 1"

Suction port - Ø58 mm

• net: 3879,77 PLN
• • Currency: zł € $

Piston pump Sunfab SAP-108L-N-DL4-H35-S0S-000 - H35 shaft

Product code 23109

Availability: Currently not available

Notify me about availability

Product features:

Producent - Sunfab

Seria pompy - SAP

Pump type - Single-flow piston type

Working volume - 108cc/rev

Flow - 162 l/min

Turning direction - Left

Max. working pressure (continuous) - 400 bar

Flange type - ISO 7653-D

Spacing of mounting holes - 80x80 mm

Centering diameter - 80mm

Roller type - Splines 8x32x34.9 (H35)

Compressing port - G 1"

Suction port - Ø58 mm

Description -

Sunfab SAP 012-108 DIN piston hydraulic pump

The Sunfab SAP 012-108 DIN hydraulic pump is a high-quality, constant-displacement axial piston pump designed for demanding mobile hydraulic systems. Its robust, compact design, high efficiency, and ability to operate at pressures up to 400 bar make it ideal for trucks, construction machinery, and specialized hydraulic systems.

Sunfab's SAP DIN series pumps feature a lightweight alloy housing that provides excellent corrosion resistance and efficient heat dissipation. The use of high-quality bearings, seals, and other structural components ensures durability and reliability during intensive use.

The series includes models with displacements ranging from 12.6 to 108 cm³/rev, allowing you to match the pump to the required hydraulic capacity. The pumps can be mounted directly to the PTO or to a frame bracket via an intermediate shaft.

The most important advantages:

• High performance and hydraulic efficiency.
• Maximum working pressure up to 400 bar.
• Lightweight construction made of corrosion-resistant metal.
• Smooth operation over a wide range of speeds.
• Good heat dissipation from the pump body.
• High durability and reliability during intensive work.
• Possibility to select the direction of rotation: left (L) or right (R).
• Various drive shaft variants available, including H35 upon request.

Design and connections:

• Direction of rotation: left (L) or right (R). In the appropriate version, it is possible to change the direction by rotating the rear pump cover 180°, according to the manufacturer's procedure.
• Suction connection: Ø45 mm diameter spigot for SAP 012–064 models and Ø58 mm for SAP 084–108 models.
• Discharge connection: G3/4" for SAP 012–064 models and G1" for SAP 084–108 models.
• Suction port mounting: included.
• Suction port: not included.
• Mounting flange: DIN 4-hole, ISO 7653-D.
• Drive shaft: splined DIN 5462 / ISO 14, available in L35 and H35 variants.

• net: 3455,40 PLN
• • Currency: zł € $

Sunfab SAP-084L-V-DL4-L35-S0S-200 piston pump; Optimized

Product code 23211

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 83.6 cm3/rev

Turning direction - Left

Pump type - Single-stream piston

Producent - Sunfab

• net: 3091,03 PLN
• • Currency: zł € $

Sunfab SAP-084R-V-DL4-L35-S0S-200 piston pump; Optimized

Product code 23212

Availability: Currently not available

Notify me about availability

Product features:

• net: 3091,03 PLN
• • Currency: zł € $

Sunfab SAP-108L-V-DL4-L35-S0S-200 piston pump; Optimized

Product code 23213

Availability: Currently not available

Notify me about availability

Product features:

• net: 3481,03 PLN
• • Currency: zł € $

Sunfab SAP-108R-V-DL4-L35-S0S-200 piston pump; Optimized

Product code 23214

Availability: Currently not available

Notify me about availability

Product features:

• net: 3481,03 PLN
• • Currency: zł € $

Sunfab SAPT090L-N-DL4-L35-S0S-000 piston pump

Product code 23219

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 90 cm3/rev

Turning direction - Left

Max. working pressure (continuous) - 300 bar

Flow - 135 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Spline 8x32x34.9

Pump type - Single-stream piston type

Producent - Sunfab

Description -

Sunfab SAPT 090 / 130 DIN piston hydraulic pump

The Sunfab SAPT 090/130 DIN hydraulic pump is a high-performance, fixed-displacement axial piston pump designed for demanding mobile hydraulic systems. It expands on the popular SAP series, offering larger geometric displacement and high oil flow while maintaining compact dimensions and a relatively low weight.

The SAPT series includes two models with a geometric displacement of 90 and 130 cm³/rev, providing theoretical flows of 135 and 195 l/min, respectively, at a rotational speed of 1,500 rpm. These pumps are designed for applications requiring high oil volumes and high operating pressures, which can reach up to 300 bar.

The lightweight alloy body design ensures good corrosion resistance and efficient heat dissipation during operation. The high-quality materials, bearings, and seals ensure durability, reliability, and smooth operation across the entire speed range.

Sunfab SAPT DIN pumps can be mounted directly to the PTO or to a frame bracket using an intermediate shaft. Both left- and right-hand rotation options allow for customization to the specific drivetrain requirements.

The most important advantages:

• Large geometric displacement: 90 or 130 cm³/rev.
• High oil flow – up to 195 l/min.
• Maximum working pressure up to 300 bar.
• Lightweight corrosion-resistant metal alloy body.
• Effective heat dissipation.
• Smooth and stable operation.
• High durability thanks to the use of carefully selected materials and components.
• Possibility to select left or right direction of rotation.
• Compact design for easy installation in mobile hydraulic systems.

Application:

Sunfab SAPT hydraulic pumps are used in professional mobile hydraulic systems, particularly where high oil flow and high operating pressure are required. They are suitable for trucks, crane trucks, dump trucks, hooklifts, and other specialized machines and bodies equipped with a hydraulic PTO drive.

• net: 3339,60 PLN
• • Currency: zł € $

Sunfab SAPT130L-N-DL4-L35-S0S-000 piston pump

Product code 23220

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 130 cm3/rev

Turning direction - Left

Max. working pressure (continuous) - 300 bar

Flow - 195 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Spline 8x32x34.9

Pump type - Single-stream piston type

Producent - Sunfab

Description -

Sunfab SAPT 090 / 130 DIN piston hydraulic pump

The Sunfab SAPT 090/130 DIN hydraulic pump is a high-performance, fixed-displacement axial piston pump designed for demanding mobile hydraulic systems. It expands on the popular SAP series, offering larger geometric displacement and high oil flow while maintaining compact dimensions and a relatively low weight.

The SAPT series includes two models with a geometric displacement of 90 and 130 cm³/rev, providing theoretical flows of 135 and 195 l/min, respectively, at a rotational speed of 1,500 rpm. These pumps are designed for applications requiring high oil volumes and high operating pressures, which can reach up to 300 bar.

The lightweight alloy body design ensures good corrosion resistance and efficient heat dissipation during operation. The high-quality materials, bearings, and seals ensure durability, reliability, and smooth operation across the entire speed range.

Sunfab SAPT DIN pumps can be mounted directly to the PTO or to a frame bracket using an intermediate shaft. Both left- and right-hand rotation options allow for customization to the specific drivetrain requirements.

The most important advantages:

• Large geometric capacity: 90 or 130 cm³/rev.
• High oil flow – up to 195 l/min.
• Maximum working pressure up to 300 bar.
• Lightweight corrosion-resistant metal alloy body.
• Effective heat dissipation.
• Smooth and stable operation.
• High durability thanks to the use of carefully selected materials and components.
• Possibility to select left or right direction of rotation.
• Compact design for easy installation in mobile hydraulic systems.

Application:

Sunfab SAPT hydraulic pumps are used in professional mobile hydraulic systems, particularly where high oil flow and high operating pressure are required. They are suitable for trucks, crane trucks, dump trucks, hooklifts, and other specialized machines and bodies equipped with a hydraulic PTO drive.

• net: 3339,60 PLN
• • Currency: zł € $

Gear pump HF 3,2ccm C200 E HFC2E-3,2-A

Product code 2332E

Availability: Currently not available

Notify me about availability

Product features:

• net: 347,96 PLN
• • Currency: zł € $

Sunfab SCPD-76/76L-N-DL4-L35-S0S-200 Hydraulic Pump

Product code 23333

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 75+75cc/rev

Turning direction - Left

Max. working pressure (continuous) - 350 bar

Flow - 150 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Pump type - Two-stream piston type

Producent - Sunfab

Description - Sunfab SCPD-76/76L-N-DL4-L35-S0S-200 hydraulic pump

• net: 11082,86 PLN
• • Currency: zł € $

Sunfab SCPD-76/76R-N-DL4-L35-S0S-200 Hydraulic Pump

Product code 23334

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 75+75cc/rev

Turning direction - Right

Max. working pressure (continuous) - 350 bar

Flow - 150 l/min

Flange type - ISO 7653-D

Centering diameter - 80mm

Roller type - Splines 8x32x34.9

Pump type - Two-stream piston type

Producent - Sunfab

Description - Sunfab SCPD-76/76R-N-DL4-L35-S0S-200 hydraulic pump

• net: 9500,00 PLN
• • Currency: zł € $

12.5L Meiller hydraulic pump

Product code 234-1

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 12.5 cm3 / rev

Turning direction - Two-way

Max. working pressure (continuous) - 320 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - M22x1.5

Suction port - M30x1.5

Comparison code - 234/1, 0234 2001 001, 02342001001

Adapter plate for HPR 135 pump

Product code 2353432513

Availability: Currently not available

Notify me about availability

Product features:

Producent - Linde

• net: 18,00 PLN
• • Currency: zł € $

Meiller 17,5L hydraulic pump

Product code 236-1

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 17.5 cm3 / rev

Turning direction - Two-way

Max. working pressure (continuous) - 400 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - M22x1.5

Suction port - M45x2

Comparison code - 236/1, 0236 2001 001, 02362001001

HYDRAULIKROHR DIN2391 ST37-4

Product code 2391-8X1.5

Availability: Currently not available

Notify me about availability

Product features:

Suction port Hydro Leduc G 1 1/2 "; 60mm - 0 ° straight

Product code 240066

Availability: Currently not available

Notify me about availability

Product features:

Inclination angle - 0° (straight)

Mounting connection - G 1 1/2"

Hose diameter - 60mm

Producent - Hydro Leduc

Description - Inlet connector for PA, PAC series pumps

Suction port Hydro Leduc G 1 1/2 "; 40mm - 90 °

Product code 240131

Availability: Currently not available

Notify me about availability

Product features:

Inclination angle - 90°

Mounting connection - G 1 1/2"

Hose diameter - 40mm

Producent - Hydro Leduc

Description - Inlet connector for PA, PAC, THV series pumps. Suction hose side connection: 40 mm

• net: 221,43 PLN
• • Currency: zł € $

Suction port Hydro Leduc G 1 1/2 "; 50mm - 90 °

Product code 240133

Availability: Currently not available

Notify me about availability

Product features:

Inclination angle - 90°

Mounting connection - G 1 1/2"

Hose diameter - 2" (50 mm)

Producent - Hydro Leduc

Description - Inlet connector for PA, PAC, THV series pumps. Suction hose side connection: 50 mm

• net: 275,00 PLN
• • Currency: zł € $

Suction port Hydro Leduc G 2 "; 50mm - 90 °

Product code 240135

Availability: Currently not available

Notify me about availability

Product features:

Inclination angle - 90°

Mounting connection - G 2"

Hose diameter - 2" (50 mm)

Producent - Hydro Leduc

Description - Inlet connector for PA, PAC, PAD series pumps.

Suction port Hydro Leduc G 2 "; 60mm - 0 ° straight

Product code 240170

Availability: Currently not available

Notify me about availability

Product features:

Inclination angle - 0° (straight)

Mounting connection - G 2"

Hose diameter - 60mm

Producent - HydroLeduc

Description - Inlet connector for PA, PAC, PAD series pumps. Suction hose side connection: 60 mm

Suction port Hydro Leduc G 1 1/2 "; 40mm - 0 ° straight

Product code 240182

Availability: Currently not available

Notify me about availability

Product features:

Inclination angle - 0° (straight)

Mounting connection - G 1 1/2"

Hose diameter - 40mm

Producent - Hydro Leduc

Description - Inlet connector for PA, PAC series pumps

Suction port Hydro Leduc G 1 1/2 "; 63.5mm - 0 ° straight

Product code 240186

Availability: Currently not available

Notify me about availability

Product features:

Inclination angle - 0° (straight)

Mounting connection - G 1 1/2"

Hose diameter - 63.5mm

Producent - Hydro Leduc

Description - Inlet connector for PA, PAC, PAD series pumps.

Suction port Hydro Leduc G 1 1/2 "; 76.2mm - 0 ° straight

Product code 240201

Availability: Currently not available

Notify me about availability

Product features:

Inclination angle - 0° (straight)

Mounting connection - G 1 1/2"

Hose diameter - 76.2mm

Producent - Hydro Leduc

Description - Inlet connector for PA, PAC series pumps

Pompa tłoczkowa CAT Caterpillar

Product code 241-7972

Availability: Currently not available

Notify me about availability

Product features:

Producent - CAT Caterpillar

Pump type - Double gear

Working volume - A3 = 10.5cm3 A4 = 4.5cm3

Max. working pressure (continuous) - 210 bar

Description - PVD-1B-28P-8AG4-4546A 13 tooth shaft

• net: 11250,00 PLN
• • Currency: zł € $

Argo Hytos P23-4.8L.61030 gear pump

Product code 24579600

Availability: Currently not available

Notify me about availability

Product features:

Pump type - toothed

• net: 279,61 PLN
• • Currency: zł € $

FLANGE 90-P ROTEX

Product code 24580300

Availability: Currently not available

Notify me about availability

Product features:

Description -

FLANGE 90-P ROTEX (Engine size 90 with GP1 pump)

The set includes:

• flange 90
• 90 ROTEX clutch
• mounting screws

• net: 375,40 PLN
• • Currency: zł € $

Manitou hydraulic pump

Product code 246547

Availability: Currently not available

Notify me about availability

Product features:

• net: 4529,29 PLN
• • Currency: zł € $

25001-37

Product code 25001-37

Availability: Currently not available

Notify me about availability

Product features:

25009-24 O-RING F!R  M2B

Product code 25009-24

Availability: Currently not available

Notify me about availability

Product features:

HOLLOW SHAFT

Product code 253518

Availability: Currently not available

Notify me about availability

Product features:

Meiller 29L hydraulic pump

Product code 254-1

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 29 cm3 / rev

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - M22x1.5

Suction port - M45x2

Comparison code - 254/1, 0254 2001 001, 02542001001

• net: 1835,79 PLN
• • Currency: zł € $

Hydrocar 201PE040ZSE pump piston

Product code 25431080000

Availability: Currently not available

Notify me about availability

Product features:

Description - Hydrocar 201PE040ZSE pump piston

• net: 105,30 PLN
• • Currency: zł € $

Tube for HPR 135

Product code 2553014005

Availability: Currently not available

Notify me about availability

Product features:

Producent - Linde

• net: 197,14 PLN
• • Currency: zł € $

Support plate for HPR 135

Product code 2553431804

Availability: Currently not available

Notify me about availability

Product features:

Producent - Linde

• net: 634,29 PLN
• • Currency: zł € $

Hydrocar 201PE250WSE spring

Product code 25651050000

Availability: Currently not available

Notify me about availability

Product features:

• net: 3,09 PLN
• • Currency: zł € $

Hydrocar 201PE250WSE valve body

Product code 25741050

Availability: Currently not available

Notify me about availability

Product features:

• net: 39,59 PLN
• • Currency: zł € $

Hydrocar 201PE250WSE foot

Product code 25751050

Availability: Currently not available

Notify me about availability

Product features:

• net: 3,24 PLN
• • Currency: zł € $

Gear pump for Atlas excavator

Product code 2607870

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 22.87 cm3 / rev

Turning direction - Right

Manufacturer - HPI

Description - 181019192 P1DJL2022CL30D01 A5071468 Reference code: Linde 0009810060

• net: 5379,64 PLN
• • Currency: zł € $

Meiller 2x17,5L hydraulic pump

Product code 264-144

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Piston, two-stream

Working volume - 2x17.5 cm3 / rev

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Comparison code - 264/144

Meiller 52L hydraulic pump old number 210/1c

Product code 265-1

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 52 cm3 / rev

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - M22x1.5

Suction port - M45x2

Description -

Meiller 52L hydraulic pump 265/1 265/1x 485/1

Old number: 210/1C

Comparison code - 02652001001, 0265 2001 001, 265/1, 210/1C

• net: 6040,36 PLN
• • Currency: zł € $

Meiller 2x26L hydraulic pump

Product code 265-44

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Piston, two-stream

Working volume - 2x26 cm3 / rev

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - M22x1.5

Suction port - M45x2

Comparison code - 265/44, 0265 2001 044, 02652001044

Meiller 60L hydraulic pump

Product code 265-6x

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Meiller 25L hydraulic pump reduced dimensions

Product code 266-2

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Manitou KP30.38S0-04S3-LME / GC / GE / BNL gear pump

Product code 269378

Availability: Currently not available

Notify me about availability

Product features:

• net: 3369,23 PLN
• • Currency: zł € $

Meiller 106.7L hydraulic pump

Product code 270-107

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 106,7 cm3/obr

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - G 1"

Suction port - G 1 1/4"

Comparison code - 270/107, 0270 2001 107, 02702001107

Meiller 23L hydraulic pump

Product code 270-23

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 23 cm3 / rev

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - G 1/2"

Suction port - G 3/4"

Comparison code - 270/23, 0270 2001 023, 02702001023

Meiller 32L hydraulic pump

Product code 270-32

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 32 cm3 / rev

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - G 1/2"

Suction port - G 3/4"

Comparison code - 270/32, 0270 2001 032, 02702001032

Meiller 45.6L hydraulic pump

Product code 270-45

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 45.6 cm3 / rev

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - G 3/4"

Suction port - G 1"

Comparison code - 270/45, 0270 2001 045, 02702001045

Hydraulic pump Meiller 63R

Product code 270-62

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Working volume - 63 cm3/obr

Turning direction - Right

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - G 3/4"

Suction port - G 1"

Description -

Meiller 63R hydraulic pump

Comparison code - 270/62

• net: 2422,68 PLN
• • Currency: zł € $

Hydraulic pump Meiller 63L

Product code 270-63

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Working volume - 63 cm3/obr

Turning direction - Left

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - G 3/4"

Suction port - G 1"

Description -

Meiller 63L hydraulic pump

The direction of rotation can be changed by swapping the connectors.

Comparison code - 270/63, 0270 2001 063, 02702001063

• net: 2213,69 PLN
• • Currency: zł € $

Meiller 80,4L hydraulic pump

Product code 270-80

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 80.4 cm3 / rev

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x34.9

Compressing port - G 1"

Suction port - G 1 1/4"

Comparison code - 270/80, 0270 2001 080, 02702001080

Meiller 107L hydraulic pump

Product code 273-107

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Variable displacement piston

Working volume - 107 cm3 / rev

Turning direction - Left

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35

Compressing port - G 1"

Suction port - G 1 1/4"

Comparison code - 273/107, 0273 2001 107, 02732001107

Meiller 55L hydraulic pump

Product code 273-55

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Piston variable displacement

Working volume - 55 cm3 / rev

Turning direction - Left

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35

Compressing port - G 3/4"

Suction port - G 1"

Comparison code - 273/55, 0273 2001 055, 02732001055

Meiller 80,4L hydraulic pump

Product code 273-80

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Piston variable displacement

Working volume - 80.4 cm3 / rev

Turning direction - Left

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35

Compressing port - G 1"

Suction port - G 1 1/4"

Comparison code - 273/80, 0273 2001 080, 02732001080

Hydraulic pump Manitou 273626

Product code 273626

Availability: Currently not available

Notify me about availability

Product features:

Working volume - 45 cm3 / rev

Max. working pressure (continuous) - 290 bar

Manufacturer - Rexroth

Description - * see paper clip

• net: 7079,63 PLN
• • Currency: zł € $

Meiller 107L hydraulic pump

Product code 274-107

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Variable displacement piston

Working volume - 107 cm3/obr

Turning direction - Right

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35

Compressing port - G 1"

Suction port - G 1 1/4"

Comparison code - 274/107, 0274 2001 107, 02742001107

Meiller 55L hydraulic pump

Product code 274-55

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Variable displacement piston

Working volume - 55 cm3/obr

Turning direction - Right

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35

Compressing port - G 3/4"

Suction port - G 1"

Comparison code - 274/55, 0274 2001 055, 02742001055

Meiller 80.4L A17VO080DRS hydraulic pump

Product code 274-80

Availability: Currently not available

Notify me about availability

Product features:

Producent - Rexroth

Pump type - Piston variable displacement

Working volume - 80cc/rev

Turning direction - Right

Max. working pressure (continuous) - 350 bars

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35

Compressing port - G 1"

Suction port - G 1 1/4"

Description -

Rexroth production for Meiller-Kipper A17VO080DRS00/10MRWK0E81-0 2163863

Comparison code - 274/80, 0274 2001 080, 02742001080

Meiller 61L hydraulic pump

Product code 275-1

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 61 cm3 / rev

Max. working pressure (continuous) - 350 bar

Meiller 89L hydraulic pump

Product code 276-1

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 89 cm3 / rev

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35.7

Compressing port - M27x2

Suction port - M45x2

Comparison code - 276/1, 0276 2001 001, 02762001001

O-RING 124x4 N-NBR70

Product code 278267

Availability: Currently not available

Notify me about availability

Product features:

Hydraulic gear pump

Product code 2783487

Availability: Currently not available

Notify me about availability

Product features:

• net: 642,86 PLN
• • Currency: zł € $

O-RING 140.00x3.00 N-FKM80 / D-HMS111

Product code 279570

Availability: Currently not available

Notify me about availability

Product features:

WASHER-21.0 DIN 6916

Product code 279729

Availability: Currently not available

Notify me about availability

Product features:

ABOUT RING-METRIC 4 X 98 NBR / NITRILE, 70D

Product code 279844

Availability: Currently not available

Notify me about availability

Product features:

O-RING 350x3-N-NBR70 / D-HMS100

Product code 281758

Availability: Currently not available

Notify me about availability

Product features:

Meiller 1x77P / 1x38P hydraulic pump

Product code 286-54

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Parker pump for Manitou MLT730, 845

Product code 286453

Availability: Currently not available

Notify me about availability

Product features:

Producent - Parker

Pump type - Toothed

Turning direction - Left

Flange type - SAE "B", 4 bolt

Description -

Parker two-section pump: 45+16 ccm3/rev

Used in JCB machines:

• 535-140 HiViZ DIESELMAX
• 535-125 HiViZ DIESELMAX
• 550-140
• 540-140
• 560-80

Comparison code - 9812/7450, 9812/7400

• net: 3816,73 PLN
• • Currency: zł € $

SCREW-SHC M12x40 DIN912 10.9

Product code 290502

Availability: Currently not available

Notify me about availability

Product features:

SCREW-SHC M10x30 DIN912 12.9

Product code 293225

Availability: Currently not available

Notify me about availability

Product features:

WASHER B 10.5 DIN125 140HV A2

Product code 294462

Availability: Currently not available

Notify me about availability

Product features:

Meiller 78L hydraulic pump

Product code 295-1

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 78 cm3 / rev

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35.7

Compressing port - M27x2

Suction port - M45x2

Comparison code - 295/1, 0295 2001 001, 02952001001

• net: 4885,38 PLN
• • Currency: zł € $

Meiller 1x52L / 1x26L hydraulic pump

Product code 295-154

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Double-stream piston

Working volume - 52+26 cm3/obr

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35.7

Compressing port - M24x1.5

Suction port - M45x2

Comparison code - 295/154, 0295 2001 154, 02952001154

• net: 8146,07 PLN
• • Currency: zł € $

Hydraulic pump Meiller 1x52L / 1x26L

Product code 295-54

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Double-stream piston

Working volume - 52+26 cm3/obr

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35.7

Compressing port - M24x1.5

Suction port - M45x2

Comparison code - 295/54, 0295 2001 054, 02952001054

• net: 7190,00 PLN
• • Currency: zł € $

Hydraulic pump meiller 55 / 26l, straight

Product code 295/154B

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Working volume - 52+26 cm3/obr

Turning direction - Two-way

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35.7

Compressing port - M24x1.5

Suction port - M45x2

Comparison code - 295/154, 0295 2001 154, 295/154 B, 295/154B

• net: 8380,00 PLN
• • Currency: zł € $

Meiller 115L hydraulic pump

Product code 296-1

Availability: Currently not available

Notify me about availability

Product features:

Producent - Meiller

Pump type - Single-stream piston

Working volume - 115 cm3/obr

Max. working pressure (continuous) - 350 bar

Flange type - 80/80mm, 4 screws

Spacing of mounting holes - 80x80 mm

Centering diameter - 80 mm

Roller type - Spline 8x32x35.7

Compressing port - M27x2

Suction port - M45x2

Comparison code - 296/1, 0296 2001 001, 02962001001

O-RING 405.26x3.53 N-NBR70 / D-HMS100

Product code 296103

Availability: Currently not available

Notify me about availability

Product features:

OUTPUT GEAR

Product code 296806

Availability: Currently not available

Notify me about availability

Product features:

WEAR SLEEVE

Product code 296848

Availability: Currently not available

Notify me about availability

Product features:

RING-RETAINING 160x4 DIN472

Product code 297655

Availability: Currently not available

Notify me about availability

Product features:

RING-RETAINING 90x3 DIN471

Product code 297689

Availability: Currently not available

Notify me about availability

Product features:

O-RING 202.79X 3.53-N-NBR90 / HMS101

Product code 299131

Availability: Currently not available

Notify me about availability

Product features:

Bosch Rexroth gear pump

Product code 2L36FB601

Availability: Currently not available

Notify me about availability

Product features:

• net: 2142,86 PLN
• • Currency: zł € $

Pompa hydrauliczna grupa 3. 31.0cm3, wałek 1:8, typ europejski.

Product code 2P13105CB7

Availability: Currently not available

Notify me about availability

Product features:

Description - Hydraulic pump 31.0cm3, shaft 1:8, European type, right rotation.

• net: 537,49 PLN
• • Currency: zł € $