Adhesives

Klej cyjanoakrylowy Bondini Plus 6g

Product code RM-02-040

Availability: Available (quantity: 15)

Product features:

• net: 9,08 PLN
• • Currency: zł € $

Mieszanka do spawania na zimno szybkoschnąca Pro Seal 56g

Product code RM-10-010

Availability: Available (quantity: 10)

Product features:

• net: 40,95 PLN
• • Currency: zł € $

Klej Epoksydowy do Metalu 5 Minut - Strzykawka 25ml MA PROFESSIONAL

Product code RM-20-A43

Availability: Available (quantity: 2)

Product features:

Description - Epoxy Metal Adhesive 5 Minutes - Syringe 25ml MA PROFESSIONAL / fast-curing epoxy-steel mass intended for repairing damaged/cracked objects made of various metal alloys, wood, ceramic products, plastic and many other materials. The product creates a very hard bond resistant to temperatures up to 150°C and is resistant to car oils, hydraulic gear oils, petrol, water and many other substances. Initial hardening after 4 to 10 minutes depending on the ambient temperature. After one hour, the product is 80% hardened. Full hardening occurs after 24 hours.

Capacity - 25ml

• net: 17,53 PLN
• • Currency: zł € $

Błyskawiczny Klej Konstrukcyjny 10g MA PROFESSIONAL

Product code RM-20-A45

Availability: Available (quantity: 10)

Product features:

Description - Instant Construction Adhesive 10g MA PROFESSIONAL / instant low-viscosity cyanoacrylate construction adhesive for bonding many plastics and rubbers. Bonds in a few seconds. Particularly recommended for difficult-to-bond joints. Operating temperature from -50 to 100oC. Full curing after 24 hours. Bonding times of various materials [seconds]: neoprene rubber [3], nitrile rubber [2], EPDM rubber [3], balsa wood [2], polycarbonate (PC) plastic [6], ABS plastic [20], metal steel [20].

Capacity - 10g

• net: 14,00 PLN
• • Currency: zł € $

Pasta Montażowa do Układów Wydechowych 1200°C - 150g MA PROFESSIONAL

Product code RM-20-A53

Availability: Available (quantity: 5)

Product features:

Description - Exhaust System Assembly Paste 1200°C - 150g MA PROFESSIONAL / Sets quickly. Eliminates blow-by exhaust. Silences the exhaust system.

Capacity - 150g

• net: 10,74 PLN
• • Currency: zł € $

Klej do Plastików 10 Minut Czarny - Strzykawka 25ml MA PROFESSIONAL

Product code RM-20-A54

Availability: Available (quantity: 1)

Product features:

Description - Plastic Glue 10 Minutes Black - Syringe 25ml MA PROFESSIONAL / designed to bond a wide range of materials. Creates a durable and strong bond with most plastics. Fills gaps/gaps, withstands over 270 atmospheres. Sets in 10 minutes. Works on bonded surfaces.

Capacity - 25ml

• net: 17,96 PLN
• • Currency: zł € $

Masa naprawcza do zbiorników paliwa 56g MA PROFESSIONAL

Product code RM-20-B15

Availability: Available (quantity: 10)

Product features:

Description - Fuel tank repair mass 56g MA PROFESSIONAL / Repair mass for quick and permanent repair of damaged/leaky metal fuel tanks. After hardening, it shows very high resistance to petrol and diesel fuel.

Capacity - 56g

• net: 12,36 PLN
• • Currency: zł € $

Masa naprawcza do aluminium 56g MA PROFESSIONAL

Product code RM-20-B17

Availability: Available (quantity: 2)

Product features:

Description - Repair mass for aluminum 56g MA PROFESSIONAL / Repair mass for quick and permanent repair of damaged/cracked elements made of aluminum and other metals.

Capacity - 600ml

• net: 12,98 PLN
• • Currency: zł € $

Klej epoksydowy do plastików Permatex 25ml

Product code RM-60-022

Availability: Available (quantity: 7)

Product features:

• net: 38,48 PLN
• • Currency: zł € $

Klej epoksydowy przeźroczysty 1 minutowy Permatex 25ml

Product code RM-60-023

Availability: Available (quantity: 2)

Product features:

• net: 33,44 PLN
• • Currency: zł € $

Klej do gwintów MEDIUM - niebieski 50g / TEGER

Product code T-W-CH1002

Availability: Available (quantity: 60)

Product features:

Description - MEDIUM Threadlocker - Blue 50g / TEGER. A single-component, high-viscosity, medium-strength anaerobic adhesive with increased temperature resistance. It prevents self-loosening of parts subjected to vibration, such as mounting bolts on pumps, gearboxes, or presses. Works on all metals, including passive substrates (e.g., stainless steel, aluminum, and plated surfaces). It is tolerant to light contamination from industrial oils, such as engine oils, anti-corrosion oils, and coolants. Application: The surfaces to be joined should be dry, clean, and degreased. Apply a sufficient amount of adhesive and assemble the parts. Immediate assembly is not required, as the material reacts only after the components are joined. The curing process can be accelerated by using an activator. Disassembly: Loosen the joint using hand tools. If the joint is too tight, heat it (nut or bolt) to approximately 250°C and loosen it while hot. Disposal: Dispose of contents and container to a hazardous or special waste collection point in accordance with local, regional, national and/or international regulations.

Producent - TEGER

Colour - Blue {checkbox}

Capacity - 50g

Binding (curing) time - <15/24

Recommended storage temperature - 10 to 20 / do not exceed 50 °C

UFI identifier - K0H5-J0M8-Y00U-RA1E {checkbox}

Breaking Moment - 25th Dec Nm

Max thread diameter - M36{checkbox}

Max gap filling - 0.30 mm

• net: 39,91 PLN
• • Currency: zł € $

Klej do gwintów STRONG - czerwony 50g / TEGER

Product code T-W-CH1003

Availability: Available (quantity: 56)

Product features:

Description - STRONG Threadlocker - Red 50g / TEGER. A single-component, high-viscosity, high-strength anaerobic adhesive with increased temperature resistance. It prevents self-loosening of parts subjected to vibration, such as mounting bolts on pumps, gearboxes, or presses. Works on all metals, including passive substrates (e.g., stainless steel, aluminum, and plated surfaces). It is tolerant to light contamination from industrial oils, such as engine oils, corrosion-inhibiting oils, and coolants. Application: The surfaces to be joined should be dry, clean, and degreased. Apply a sufficient amount of adhesive and assemble the parts. Immediate assembly is not required, as the material reacts only after the components are joined. The curing process can be accelerated by using an activator. Disassembly: Disassembly with hand tools may be impossible. If the joint is too strong, heat the joint (nut or bolt) to approximately 250°C and disassemble while hot. Disposal: Dispose of contents and container to a collection point for hazardous or special waste in accordance with local, regional, national and/or international regulations.

Producent - TEGER

Colour - Red {checkbox}

Capacity - 50g

Binding (curing) time - <15/24

Recommended storage temperature - 10 to 20 / do not exceed 50 °C

UFI identifier - X3H5-209P-900A-ENMG {checkbox}

Breaking Moment - 20-37 Nm

Max thread diameter - M36{checkbox}

Max gap filling - 0.30 mm

• net: 39,91 PLN
• • Currency: zł € $

Klej do gwintów rurowych MEDIUM - żółty, 50g, Teger

Product code T-W-CH1038

Availability: Available (quantity: 25)

Product features:

Description - MEDIUM Pipe Thread Adhesive - Yellow, 50g, Teger Anaerobic adhesive manufactured on the basis of methacrylic resins. It cures after the exclusion of oxygen and on contact with metal, forming a reliable plastic mass. The cured joint is resistant to shock, vibration, solvents and other chemicals. Components coated with the adhesive are additionally protected against weathering and corrosion. DVGW certified. Directions for use: The surfaces to be joined should be dry, clean and degreased. Apply a sufficient amount of adhesive and assemble the components. Do not move the parts until full strength is achieved. Time to achieve initial strength (22 °C): steel - approx. 25 min; brass - approx. 15 min; stainless steel - approx. 4-5 hours; zinc dichromate - approx. 3 hours. Time to achieve full strength (22 °C): steel - approx. 6 hours; brass - approx. 1 hour; stainless steel - approx. 36 hours; zinc dichromate - approx. 12 hours. Dismantling: Disassemble using hand tools. Disposal: Dispose of contents and container to a hazardous or special waste collection point in accordance with local, regional, national and/or international regulations.

Producent - TEGER

Colour - Yellow {checkbox}

Capacity - 50g

Applicator - Spot with pump

Recommended storage temperature - 8 to 28 / do not exceed 50 °C

UFI identifier - G3V2-Q04J-T00A-PFUJ {checkbox}

Maximum thread diameter - 3/4 inch

Minimum thread diameter - 3 inch

Breaking Moment - 18-22 Nm

Maximum gap - 0.5mm

Max thread diameter - M80{checkbox}

Binding (curing) time - <15/24(min/hour)

Max gap filling - 0.50 mm

Setting time (touch) - 15-30 min

Setting time (functional) - January 3rd

Setting time (final) - 12 hours

• net: 51,33 PLN
• • Currency: zł € $

Klej do montażu łożysk i połączeń pasowych STRONG - zielony, 50g, Teger

Product code T-W-CH1039

Availability: Available (quantity: 69)

Product features:

Description - STRONG Adhesive for Mounting Bearings and Belt Connections - Green, 50g, Teger Anaerobic adhesive based on methacrylic resins. It cures after the exclusion of oxygen and upon contact with metal, forming a reliable plastic mass. The cured joint is resistant to shock, vibration, solvents, and other chemicals. Components coated with the adhesive are additionally protected against weather conditions and corrosion. DVGW certified. Directions for use: The surfaces to be joined should be dry, clean, and degreased. Apply a sufficient amount of adhesive and assemble the components. Do not move the parts until full strength is achieved. Time to achieve initial strength (22 °C): steel - approx. 5 min; aluminum - approx. 30 min; zinc dichromate - approx. 30 min. Time to achieve full strength (22 °C): steel - approx. 6 hours; zinc dichromate - approx. 6 hours; aluminum - approx. 72 hours. Disassembly: Disassembly may not be possible using hand tools. Disposal: Dispose of contents and container to a hazardous or special waste collection point in accordance with local, regional, national and/or international regulations.

Producent - TEGER

Colour - Green {checkbox}

Capacity - 50g

Applicator - Spot with pump

Recommended storage temperature - 8 to 28 / do not exceed 50 °C

Maximum thread diameter - M36

UFI identifier - T6V2-60TY-300T-CTEP {checkbox}

Maximum gap - 0.25mm

Max thread diameter - M36{checkbox}

Binding (curing) time - 5/72(min/hour)

Max gap filling - 0.50 mm

Setting time (touch) - 10 min

Setting time (functional) - January 3rd

Setting time (final) - 12 hours

• net: 49,84 PLN
• • Currency: zł € $

Klej błyskawiczny cyjanoakrylowy - ze szpilką, gęsty, 50G, Teger

Product code T-W-CH1040

Availability: Available (quantity: 81)

Product features:

Description - Cyanoacrylate Instant Adhesive - with Pin, Thick, 50G, Teger. This thick, quick-setting, single-component cyanoacrylate adhesive allows for quick and strong bonding of materials with various properties. The adhesive exhibits high resistance to dynamic loads, abrasion, and temperatures up to +135°C. The high density and long-neck bottle ensure that the product is always dispensed in the correct amount. Directions for use: Using the applicator, apply a thin layer of adhesive to one of the surfaces to be bonded. Press them firmly together and hold for several seconds (depending on the material being bonded). Disposal: Dispose of the contents and container into labeled hazardous waste containers, in accordance with national regulations.

Producent - TEGER

Colour - Colorless {checkbox}

Applicator - Pin

Capacity - 50g

Binding (curing) time - kilka sekund {checkbox}

Recommended storage temperature - 10 to 20 / do not exceed 50 °C

UFI identifier - R9V2-Q0HC-E00A-050T {checkbox}

Smell - Sharp {checkbox}

• net: 23,00 PLN
• • Currency: zł € $

Mieszanka do spawania na zimno wolnowiążąca Pro Seal 56g

Product code RM-10-009

Availability: Currently not available

Notify me about availability

Product features:

• net: 35,84 PLN
• • Currency: zł € $

Klej epoksydowy do metalu Permatex 25ml

Product code RM-60-021

Availability: Currently not available

Notify me about availability

Product features:

• net: 37,45 PLN
• • Currency: zł € $