Orbital engines

Silnik hydrauliczny orbitalny BM3250/BMS250

Product code BMS-250

Availability: Available (quantity: 1) , 2 dni

Product features:

• net: 424,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMM 20 cm3/obr (100 bar / max.140 bar) Waryński

Product code WMM-20

Availability: Available (quantity: 50) , 2 dni

Product features:

Description - Orbital hydraulic motor WMM 20 cm³/rev (100 bar / max.140 bar / max.momentary 200 bar) Waryński. WMM series motors (side connection) have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMM series motors belong to a series of small orbital motors.

Producent - WARYNSKI

Roller diameter - Ø16 mm

Max. working pressure - 14 MPa (140 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 3/8" BSP" inch

Drain connection thread - 1/8" BSP" inch

Max.Nominal pressure - 10 MPa (100 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 1005 rpm

Max. Nominal torque - 25 Nm

Max Torque - 35 Nm

Max. Working Fluid Flow - 20 l/min

Max. output power - 2.4kW

• net: 373,74 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMM 32 cm3/obr (100 bar / max.140 bar) Waryński

Product code WMM-32

Availability: Available (quantity: 25) , 2 dni

Product features:

Description - Orbital hydraulic motor WMM 32 cm³/rev (100 bar / max.140 bar / max.momentary 160 bar) Waryński. WMM series motors (side connection) have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMM series motors belong to a series of small orbital motors.

Producent - WARYNSKI

Roller diameter - Ø16 mm

Max. working pressure - 14 MPa (140 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 3/8" BSP" inch

Drain connection thread - 1/8" BSP" inch

Max.Nominal pressure - 10 MPa (100 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 630 rpm

Max. Nominal torque - 40Nm

Max Torque - 57 Nm

Max. Working Fluid Flow - 20 l/min

Max. output power - 2.4kW

• net: 374,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMP 25 cm?/obr (100 bar / max.175 bar) Waryński

Product code WMP-25

Availability: Available (quantity: 11) , 2 dni

Product features:

Description - Orbital hydraulic motor WMP 25 cm³/rev (100 bar / max.175 bar - 10 MPa/100 bar - note: maximum continuous engine operating pressure) Waryński. WMP series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Connection threads - 1/2" BSP cal

Drain connection thread - 1/4" BSP cal

Max.Nominal pressure - 10.0/100 Mpa/bar

Max. Rated speed - 1550 rpm

Max. Nominal torque - 34 Nm

Max. Working Fluid Flow - 40 l/min

Max. output power - 4.5kW

• net: 399,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMP 80 cm?/obr (140 bar / max.175 bar) Waryński

Product code WMP-80

Availability: Available (quantity: 11) , 2 dni

Product features:

Description - WMP 80 cm³/rev orbital hydraulic motor (140 bar / max.175 bar - 14 MPa/140 bar - note: maximum continuous engine operating pressure) Waryński. WMP series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Connection threads - 1/2\\\\\\\" BSP

Drain connection thread - 1/4\\\\\\\" BSP

Max.Nominal pressure - 14.0/140 Mpa/bar

Max. Rated speed - 750 rpm

Max. Nominal torque - 148 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 10.0kW

• net: 399,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 125 cm3/obr (140 bar / max.200 bar) Waryński

Product code WMR-125

Availability: Available (quantity: 5) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 125 cm³/rev (140 bar / max.175 bar / max.momentary 200 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 17.5 MPa (175 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 14 MPa (140 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 475 rpm

Max. Nominal torque - 237 Nm

Max Torque - 296 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 10kW

• net: 406,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 160 cm3/obr (140 bar / max.200 bar) Waryński

Product code WMR-160

Availability: Available (quantity: 1) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 160 cm³/rev (140 bar / max.175 bar / max.momentary 200 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 17.5 MPa (175 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 14 MPa (140 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 370 rpm

Max. Nominal torque - 310 Nm

Max Torque - 378 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 10kW

• net: 412,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny (stosowany do owijarek) WMR 200 cm3/obr (140 bar / max.200 bar) Waryński

Product code WMR-200

Availability: Available (quantity: 6) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 200 cm³/rev (140 bar / max.175 bar / max.momentary 200 bar) Waryński (used for wrapping machines). WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 17.5 MPa (175 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 14 MPa (140 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 295 rpm

Max. Nominal torque - 369 Nm

Max Torque - 450 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 8kW

• net: 418,74 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 200 cm3/obr z wałkiem fi 32mm (140 bar / max.200 bar) Waryński

Product code WMR-200-FI32

Availability: Available (quantity: 4) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 200 cm³/rev with shaft fi 32mm (140 bar / max.175 bar / max. momentary 200 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

• net: 431,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 25 cm3/obr (100 bar / max.200 bar) Waryński

Product code WMR-25

Availability: Available (quantity: 11) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 25 cm³/rev (100 bar / max.200 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

• net: 406,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 250 cm3/obr (110 bar / max.160 bar) Waryński

Product code WMR-250

Availability: Available (quantity: 5) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 250 cm³/rev (110 bar / max.140 bar / max.momentary 160 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 14 MPa (160 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 11 MPa (110 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 235 rpm

Max. Nominal torque - 380 Nm

Max Torque - 470 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 6kW

• net: 424,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 315 cm3/obr (90 bar / max.130 bar) Waryński

Product code WMR-315

Availability: Available (quantity: 3) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 315 cm³/rev (90 bar / max.110 bar / max.momentary 130 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 11 MPa (110 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 9 MPa (90 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 185 rpm

Max. Nominal torque - 380 Nm

Max Torque - 470 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 5kW

• net: 431,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 32 cm3/obr (100 bar / max.200 bar) Waryński

Product code WMR-32

Availability: Available (quantity: 7) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 32 cm³/rev (100 bar / max.200 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

• net: 406,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 40 cm3/obr (100 bar / max.200 bar) Waryński

Product code WMR-40

Availability: Available (quantity: 8) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 40 cm³/rev (100 bar / max.200 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

• net: 406,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 400 cm3/obr (70 bar / max.110 bar) Waryński

Product code WMR-400

Availability: Available (quantity: 6) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 340 cm³/rev (70 bar / max.90 bar / max.momentary 110 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 9 MPa (90 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 7 MPa (70 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 150 rpm

Max. Nominal torque - 380 Nm

Max Torque - 470 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 4kW

• net: 437,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 400 cm3/obr z wałkiem fi 32mm (70 bar / max.110 bar) Waryński

Product code WMR-400-FI32

Availability: Available (quantity: 1) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 340 cm³/rev with shaft fi 32mm (70 bar / max.90 bar / max.momentary 110 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

• net: 468,74 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 80 cm3/obr (140 bar / max.200 bar) Waryński

Product code WMR-80

Availability: Available (quantity: 1) , 2 dni

Product features:

Description - Orbital hydraulic motor WMR 80 cm³/rev (140 bar / max.175 bar / max.momentary 200 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 17.5 MPa (175 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 14 MPa (140 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 745 rpm

Max. Nominal torque - 152 Nm

Max Torque - 189 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 10kW

• net: 393,74 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny wzmacniany WMR-S 100 cm3/obr (175 bar / max.220 bar) Waryński

Product code WMR-S-100

Availability: Available (quantity: 26) , 2 dni

Product features:

Description - Orbital hydraulic motor reinforced WMR-S 100 cm³/rev (175 bar / 200 bar / max. momentary 220 bar) Waryński. WMR-S series motors have a lightweight compact design, high torque. Possibility of connecting in parallel or series. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMR-S Series motors have a reinforced design - thanks to which the operating parameters have been increased: pressure, torque and power in relation to WMR series motors.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 20 MPa (200 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 17.5 MPa (175 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 595 rpm

Max. Nominal torque - 236 Nm

Max Torque - 270 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 12kW

• net: 424,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny wzmacniany WMR-S 125 cm3/obr (175 bar / max.220 bar) Waryński

Product code WMR-S-125

Availability: Available (quantity: 27) , 2 dni

Product features:

Description - Orbital hydraulic motor reinforced WMR-S 125 cm³/rev (175 bar / 200 bar / max. momentary 220 bar) Waryński. WMR-S series motors have a lightweight compact design, high torque. Possibility of connecting in parallel or series. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMR-S Series motors have a reinforced design - thanks to which the operating parameters have been increased: pressure, torque and power in relation to WMR series motors.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 20 MPa (200 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 17.5 MPa (175 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 475 rpm

Max. Nominal torque - 296 Nm

Max Torque - 338 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 12kW

• net: 431,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny wzmacniany WMR-S 160 cm3/obr (175 bar / max.220 bar) Waryński

Product code WMR-S-160

Availability: Available (quantity: 3) , 2 dni

Product features:

Description - Orbital hydraulic motor reinforced WMR-S 160 cm³/rev (175 bar / 200 bar / max. momentary 220 bar) Waryński. WMR-S series motors have a lightweight compact design, high torque. Possibility of connecting in parallel or series. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMR-S Series motors have a reinforced design - thanks to which the operating parameters have been increased: pressure, torque and power in relation to WMR series motors.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 20 MPa (200 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 17.5 MPa (175 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 370 rpm

Max. Nominal torque - 378 Nm

Max Torque - 433 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 12kW

• net: 437,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny (stosowany do owijarek) wzmacniany WMR-S 200 cm3/obr (175 bar / max.200 bar) Waryński

Product code WMR-S-200

Availability: Available (quantity: 237) , 2 dni

Product features:

Description - Orbital hydraulic motor reinforced WMR-S 200 cm³/rev (175 bar / 190 bar / max. momentary 200 bar) Waryński (used for wrapping machines). WMR-S series motors have a lightweight compact design, high torque. Possibility of connecting in parallel or series. In order to achieve a longer service life, it is recommended that the optimum working conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMR-S Series motors have a reinforced design - thanks to which the working parameters have been increased: pressure, torque and power in relation to WMR series motors.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 19 MPa (190 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 17.5 MPa (175 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 295 rpm

Max. Nominal torque - 450 Nm

Max Torque - 486 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 11kW

• net: 443,74 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny wzmacniany WMR-S 250 cm3/obr (140 bar / max.180 bar) Waryński

Product code WMR-S-250

Availability: Available (quantity: 7) , 2 dni

Product features:

Description - Orbital hydraulic motor reinforced WMR-S 250 cm³/rev (140 bar / 160 bar / max. momentary 180 bar) Waryński. WMR-S series motors have a lightweight compact design, high torque. Possibility of connecting in parallel or series. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMR-S Series motors have a reinforced design - thanks to which the operating parameters have been increased: pressure, torque and power in relation to WMR series motors.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 16 MPa (160 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 14 MPa (140 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 235 rpm

Max. Nominal torque - 470 Nm

Max Torque - 540 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 9.5kW

• net: 449,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny wzmacniany WMR-S 315 cm3/obr (120 bar / max.150 bar) Waryński

Product code WMR-S-315

Availability: Available (quantity: 5) , 2 dni

Product features:

Description - Orbital hydraulic motor reinforced WMR-S 315 cm³/rev (120 bar / 140 bar / max. momentary 150 bar) Waryński. WMR-S series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMR-S Series motors have a reinforced design - thanks to which the operating parameters have been increased: pressure, torque and power in relation to WMR series motors.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 14 MPa (140 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 12 MPa (120 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 185 rpm

Max. Nominal torque - 485 Nm

Max Torque - 573 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 7.5kW

• net: 456,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny wzmacniany WMR-S 400 cm3/obr (100 bar / max.140 bar) Waryński

Product code WMR-S-400

Availability: Available (quantity: 3) , 2 dni

Product features:

Description - Orbital hydraulic motor reinforced WMR-S 400 cm³/rev (100 bar / 120bar / max. momentary 140 bar) Waryński. WMR-S series motors have a lightweight compact design, high torque. Possibility of connecting in parallel or series. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMR-S Series motors have a reinforced design - thanks to which the operating parameters have been increased: pressure, torque and power in relation to WMR series motors.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 12 MPa (120 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 10 MPa (100 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 150 rpm

Max. Nominal torque - 500 Nm

Max Torque - 614 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 6.5kW

• net: 462,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny wzmacniany WMR-S 50 cm3/obr (175 bar / max.220 bar) Waryński

Product code WMR-S-50

Availability: Available (quantity: 1) , 2 dni

Product features:

Description - Orbital hydraulic motor reinforced WMR-S 50 cm³/rev (175 bar / 200 bar / max. momentary 220 bar) Waryński. WMR-S series motors have a lightweight compact design, high torque. Possibility of connecting in parallel or series. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMR-S Series motors have a reinforced design - thanks to which the operating parameters have been increased: pressure, torque and power in relation to WMR series motors.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 20 MPa (200 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 17.5 MPa (175 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 770 rpm

Max. Nominal torque - 110 Nm

Max Torque - 135 Nm

Max. Working Fluid Flow - 40 l/min

Max. output power - 7.5kW

• net: 412,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny wzmacniany WMR-S 80 cm3/obr (175 bar / max.220 bar) Waryński

Product code WMR-S-80

Availability: Available (quantity: 12) , 2 dni

Product features:

Description - Orbital hydraulic motor reinforced WMR-S 80 cm³/rev (175 bar / 200 bar / max. momentary 220 bar) Waryński. WMR-S series motors have a lightweight compact design, high torque. Possibility of connecting in parallel or series. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMR-S Series motors have a reinforced design - thanks to which the operating parameters have been increased: pressure, torque and power in relation to WMR series motors.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 20 MPa (200 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 17.5 MPa (175 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 745 rpm

Max. Nominal torque - 189 Nm

Max Torque - 216 Nm

Max. Working Fluid Flow - 60 l/min

Max. output power - 12kW

• net: 418,74 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMS 100 cm3/obr (175 bar / max.225 bar) Waryński

Product code WMS-100

Availability: Available (quantity: 1) , 2 dni

Product features:

Description - Orbital hydraulic motor WMS 100 cm³/rev (175 bar / max.200 bar / max.momentary 225 bar) Waryński. WMS series motors are characterized by compact design, high torque, high absorption. Disc distribution ensures high efficiency, efficiency, smooth operation and long service life. Reinforced shaft seal allows both series and parallel connections of motors. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø32 mm

Max. working pressure - 20 MPa (200 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 17.5 MPa (175 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 745 rpm

Max. Nominal torque - 242 Nm

Max Torque - 283 Nm

Max. Working Fluid Flow - 75 l/min

Max. output power - 16kW

• net: 762,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMS 125 cm3/obr (175 bar / max.225 bar) Waryński

Product code WMS-125

Availability: Available (quantity: 4) , 2 dni

Product features:

Description - Orbital hydraulic motor WMS 125 cm³/rev (175 bar / max.200 bar / max.momentary 225 bar) Waryński. WMS series motors are characterized by a compact design, high torque, high absorption. Disk distribution ensures high efficiency, efficiency, smooth operation and long service life. Reinforced shaft seal allows both series and parallel connections of motors. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø32 mm

Max. working pressure - 20 MPa (200 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 17.5 MPa (175 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 590 rpm

Max. Nominal torque - 303 Nm

Max Torque - 345 Nm

Max. Working Fluid Flow - 75 l/min

Max. output power - 16kW

• net: 774,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMS 160 cm3/obr (160 bar / max.225 bar) Waryński

Product code WMS-160

Availability: Available (quantity: 5) , 2 dni

Product features:

Description - Orbital hydraulic motor WMS 160 cm³/rev (160 bar / max.200 bar / max.momentary 225 bar) Waryński. WMS series motors are characterized by compact design, high torque, high absorption. Disc distribution ensures high efficiency, efficiency, smooth operation and long service life. Reinforced shaft seal allows both series and parallel connections of motors. In order to achieve longer service life, it is recommended that the optimum working conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø32 mm

Max. working pressure - 20 MPa (200 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 16 MPa (160 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 465 rpm

Max. Nominal torque - 358 Nm

Max Torque - 429 Nm

Max. Working Fluid Flow - 75 l/min

Max. output power - 14kW

• net: 774,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMS 200 cm3/obr (160 bar / max.225 bar) Waryński

Product code WMS-200

Availability: Available (quantity: 7) , 2 dni

Product features:

Description - Orbital hydraulic motor WMS 200 cm³/rev (160 bar / max.200 bar / max.momentary 225 bar) Waryński. WMS series motors are characterized by a compact design, high torque, high absorption. Disk distribution ensures high efficiency, efficiency, smooth operation and long service life. Reinforced shaft seal allows both series and parallel connections of motors. In order to achieve a longer service life, it is recommended that the optimal working conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø32 mm

Max. working pressure - 20 MPa (200 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 16 MPa (160 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 370 rpm

Max. Nominal torque - 438 Nm

Max Torque - 540 Nm

Max. Working Fluid Flow - 75 l/min

Max. output power - 14kW

• net: 787,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMS 250 cm3/obr (125 bar / max.200 bar) Waryński

Product code WMS-250

Availability: Available (quantity: 1) , 2 dni

Product features:

Description - Orbital hydraulic motor WMS 250 cm³/rev (125 bar / max.160 bar / max.momentary 200 bar) Waryński. WMS series motors are characterized by compact design, high torque, high absorption. Disk distribution ensures high efficiency, efficiency, smooth operation and long service life. Reinforced shaft seal allows both series and parallel connections of motors. In order to achieve longer service life, it is recommended that the optimum working conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø32 mm

Max. working pressure - 16 MPa (160 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 12.5 MPa (125 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 295 rpm

Max. Nominal torque - 440 Nm

Max Torque - 580 Nm

Max. Working Fluid Flow - 75 l/min

Max. output power - 11kW

• net: 799,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMS 80 cm3/obr (175 bar / max.225 bar) Waryński

Product code WMS-80

Availability: Available (quantity: 3) , 2 dni

Product features:

Description - Orbital hydraulic motor WMS 80 cm³/rev (175 bar / max.200 bar / max.momentary 225 bar) Waryński. WMS series motors are characterized by a compact design, high torque, high absorption. Disk distribution ensures high efficiency, efficiency, smooth operation and long service life. Reinforced shaft seal allows both series and parallel connections of motors. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø32 mm

Max. working pressure - 20 MPa (200 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 17.5 MPa (175 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 805 rpm

Max. Nominal torque - 194 Nm

Max Torque - 218 Nm

Max. Working Fluid Flow - 65 l/min

Max. output power - 14kW

• net: 737,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMT 160 cm3/obr (200 bar / max.280 bar) Waryński

Product code WMT-160

Availability: Available (quantity: 4) , 2 dni

Product features:

Description - Orbital hydraulic motor WMT 160 cm³/rev (200 bar / max.240 bar / max.momentary 280 bar) Waryński. WMT series motors are characterized by compact design, high torque, high absorption. They work in the range of significant torques at rather low rotational speeds. Possibility of parallel or series connection. Disc distribution ensures high efficiency, efficiency, smooth operation and long service life. In order to achieve longer service life, it is recommended that the optimal working conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø40 mm

Max. working pressure - 24 MPa (240 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 3/4" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 20 MPa (200 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 625 rpm

Max. Nominal torque - 450 Nm

Max Torque - 559 Nm

Max. Working Fluid Flow - 100 l/min

Max. output power - 20.1kW

• net: 1268,74 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMT 200 cm3/obr (200 bar / max.280 bar) Waryński

Product code WMT-200

Availability: Available (quantity: 3) , 2 dni

Product features:

Description - Orbital hydraulic motor WMT 200 cm³/rev (200 bar / max.240 bar / max.momentary 280 bar) Waryński. WMT series motors are characterized by compact design, high torque, high absorption. They work in the range of significant torques at rather low rotational speeds. Possibility of parallel or series connection. Disc distribution ensures high efficiency, efficiency, smooth operation and long service life. In order to achieve longer service life, it is recommended that the optimal working conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø40 mm

Max. working pressure - 24 MPa (240 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 3/4" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 20 MPa (200 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 495 rpm

Max. Nominal torque - 561 Nm

Max Torque - 714 Nm

Max. Working Fluid Flow - 100 l/min

Max. output power - 25.2kW

• net: 1356,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMT 250 cm3/obr (200 bar / max.280 bar) Waryński

Product code WMT-250

Availability: Available (quantity: 2) , 2 dni

Product features:

Description - Orbital hydraulic motor WMT 250 cm³/rev (200 bar / max.240 bar / max.momentary 280 bar) Waryński. WMT series motors are characterized by compact design, high torque, high absorption. They work in the range of significant torques at rather low rotational speeds. Possibility of parallel or series connection. Disc distribution ensures high efficiency, efficiency, smooth operation and long service life. In order to achieve longer service life, it is recommended that the optimal working conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø40 mm

Max. working pressure - 24 MPa (240 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 3/4" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 20 MPa (200 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 395 rpm

Max. Nominal torque - 710 Nm

Max Torque - 883 Nm

Max. Working Fluid Flow - 100 l/min

Max. output power - 25.2kW

• net: 1381,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMT 320 cm3/obr (200 bar / max.280 bar) Waryński

Product code WMT-320

Availability: Available (quantity: 5) , 2 dni

Product features:

Description - Orbital hydraulic motor WMT 320 cm³/rev (200 bar / max.240 bar / max.momentary 280 bar) Waryński. WMT series motors are characterized by compact design, high torque, high absorption. They work in the range of significant torques at rather low rotational speeds. Possibility of parallel or series connection. Disc distribution ensures high efficiency, efficiency, smooth operation and long service life. In order to achieve longer service life, it is recommended that the optimal working conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

• net: 1393,74 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMT 400 cm3/obr (180 bar / max.240 bar) Waryński

Product code WMT-400

Availability: Available (quantity: 9) , 2 dni

Product features:

Description - Orbital hydraulic motor WMT 400 cm³/rev (180 bar / max.210 bar / max.momentary 240 bar) Waryński. WMT series motors are characterized by compact design, high torque, high absorption. They work in the range of significant torques at rather low rotational speeds. Possibility of parallel or series connection. Disc distribution ensures high efficiency, efficiency, smooth operation and long service life. In order to achieve longer service life, it is recommended that the optimal working conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø40 mm

Max. working pressure - 21 MPa (210 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 3/4" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 18 MPa (180 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 245 rpm

Max. Nominal torque - 1008 Nm

Max Torque - 1255 Nm

Max. Working Fluid Flow - 100 l/min

Max. output power - 22kW

• net: 1418,74 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMT 500 cm3/obr (160 bar / max.210 bar) Waryński

Product code WMT-500

Availability: Available (quantity: 21) , 2 dni

Product features:

Description - Orbital hydraulic motor WMT 500 cm³/rev (160 bar / max.180 bar / max.momentary 210 bar) Waryński. WMT series motors are characterized by compact design, high torque, high absorption. They work in the range of significant torques at rather low rotational speeds. Possibility of parallel or series connection. Disc distribution ensures high efficiency, efficiency, smooth operation and long service life. In order to achieve longer service life, it is recommended that the optimal working conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø40 mm

Max. working pressure - 18 MPa (180 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 3/4" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 16 MPa (160 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 185 rpm

Max. Nominal torque - 1121 Nm

Max Torque - 1377 Nm

Max. Working Fluid Flow - 100 l/min

Max. output power - 21kW

• net: 1456,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMV 400 cm3/obr (200 bar / max.280 bar) Waryński

Product code WMV-400

Availability: Available (quantity: 9) , 2 dni

Product features:

Description - Orbital hydraulic motor WMV 400 cm³/rev (200 bar / max.240 bar / max.momentary 280 bar) Waryński. WMV series motors have a compact design, high torque and high absorption. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMV series motors are characterized by smooth operation, efficiency, transfer of high longitudinal and transverse loads.

Producent - WARYNSKI

Roller diameter - Ø50 mm

Max. working pressure - 24 MPa (240 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 20 MPa (200 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 375 rpm

Max. Nominal torque - 1108 Nm

Max Torque - 1440 Nm

Max. Working Fluid Flow - 150 l/min

Max. output power - 32kW

• net: 1562,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMV 500 cm3/obr (200 bar / max.280 bar) Waryński

Product code WMV-500

Availability: Available (quantity: 16) , 2 dni

Product features:

Description - Orbital hydraulic motor WMV 500 cm³/rev (200 bar / max.240 bar / max.momentary 280 bar) Waryński. WMV series motors have a compact design, high torque and high absorption. Possibility of parallel or series connection. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMV series motors are characterized by smooth operation, efficiency, transfer of high longitudinal and transverse loads.

Producent - WARYNSKI

Roller diameter - Ø50 mm

Max. working pressure - 24 MPa (240 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 20 MPa (200 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 300 rpm

Max. Nominal torque - 1385 Nm

Max Torque - 1783 Nm

Max. Working Fluid Flow - 150 l/min

Max. output power - 32kW

• net: 1649,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMV 630 cm3/obr (180 bar / max.240 bar) Waryński

Product code WMV-630

Availability: Available (quantity: 19) , 2 dni

Product features:

Description - Orbital hydraulic motor WMV 630 cm³/rev (180 bar / max.210 bar / max.momentary 240 bar) Waryński. WMV series motors have a compact design, high torque and high absorption. Possibility of parallel or series connection. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMV series motors are characterized by smooth operation, efficiency, transfer of high longitudinal and transverse loads.

Producent - WARYNSKI

Roller diameter - Ø50 mm

Max. working pressure - 21 MPa (210 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 18 MPa (180 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 240 rpm

Max. Nominal torque - 1570 Nm

Max Torque - 1951 Nm

Max. Working Fluid Flow - 150 l/min

Max. output power - 32kW

• net: 1662,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMV 800 cm3/obr (160 bar / max.210 bar) Waryński

Product code WMV-800

Availability: Available (quantity: 2) , 2 dni

Product features:

Description - Orbital hydraulic motor WMV 800 cm3/rev (160 bar / max.210 bar) Waryński. WMV series motors have a compact design, high torque and high absorption. Possibility of parallel or series connection. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMV series motors are characterized by smooth operation, efficiency, transfer of high longitudinal and transverse loads.

Producent - WARYNSKI

• net: 1774,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny BM3125/BMS125

Product code BMS-125

Availability: Currently not available

Notify me about availability

Product features:

• net: 419,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny BMSY-160E4-BDH

Product code BMS-160

Availability: Currently not available

Notify me about availability

Product features:

Silnik hydrauliczny orbitalny BMV 985 cm3/obr 140 bar

Product code BMV-985

Availability: Currently not available

Notify me about availability

Product features:

Description - BMV 985 cm3/rev 140 bar orbital hydraulic motor. BMV series motors have a compact design, high torque and high absorption. Possibility of parallel or series connection. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Roller diameter - Ø50 mm

Connection threads - 1\" BSP

Drain connection thread - 1/4\" BSP

Max.Nominal pressure - 14/140 Mpa/bar

Max. Rated speed - 150 rpm

Max. Nominal torque - 1900 Nm

Max Torque - 2133 Nm

Max. Working Fluid Flow - 150 l/min

Max. output power - 24kW

• net: 1750,00 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 25 cm3/obr z wałkiem fi 32mm (100 bar / max.200 bar) Waryński

Product code WMR-25-FI32

Availability: Currently not available

Notify me about availability

Product features:

Description - Orbital hydraulic motor WMR 25 cm³/rev with shaft fi 32mm (100 bar / max.200 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

• net: 418,74 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMR 50 cm3/obr (140 bar / max.200 bar) Waryński

Product code WMR-50

Availability: Currently not available

Notify me about availability

Product features:

Description - Orbital hydraulic motor WMR 50 cm³/rev (140 bar / max.175 bar / max.momentary 200 bar) Waryński. WMR series motors have a lightweight compact design, high torque. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø25 mm

Max. working pressure - 17.5 MPa (175 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 14 MPa (140 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 770 rpm

Max. Nominal torque - 93 Nm

Max Torque - 118 Nm

Max. Working Fluid Flow - 40 l/min

Max. output power - 7kW

• net: 387,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMS 315 cm3/obr (125 bar / max.200 bar) Waryński

Product code WMS-315

Availability: Currently not available

Notify me about availability

Product features:

Description - Orbital hydraulic motor WMS 315 cm³/rev (125 bar / max.160 bar / max.momentary 200 bar) Waryński. WMS series motors are characterized by a compact design, high torque, high absorption. Disk distribution ensures high efficiency, efficiency, smooth operation and long service life. Reinforced shaft seal allows both series and parallel connections of motors. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø32 mm

Max. working pressure - 16 MPa (160 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1/2" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 12.5 MPa (125 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 230 rpm

Max. Nominal torque - 551 Nm

Max Torque - 625 Nm

Max. Working Fluid Flow - 75 l/min

Max. output power - 10kW

• net: 824,99 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMT 630 cm3/obr (140 bar / max.190 bar) Waryński

Product code WMT-630

Availability: Currently not available

Notify me about availability

Product features:

Description - Orbital hydraulic motor WMT 630 cm³/rev (160 bar / max.180 bar / max.momentary 210 bar) Waryński. WMT series motors are characterized by compact design, high torque, high absorption. They work in the range of significant torques at rather low rotational speeds. Possibility of parallel or series connection. Disc distribution ensures high efficiency, efficiency, smooth operation and long service life. In order to achieve longer service life, it is recommended that the optimal working conditions are at the level of 1/3 to 2/3 of the maximum parameters.

Producent - WARYNSKI

Roller diameter - Ø40 mm

Max. working pressure - 16 MPa (160 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 3/4" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 14 MPa (140 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 155 rpm

Max. Nominal torque - 1124 Nm

Max Torque - 1317 Nm

Max. Working Fluid Flow - 100 l/min

Max. output power - 20kW

• net: 1481,24 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMV 315 cm3/obr (200 bar / max.280 bar) Waryński

Product code WMV-315

Availability: Currently not available

Notify me about availability

Product features:

Description - Orbital hydraulic motor WMV 315 cm³/rev (200 bar / max.240 bar / max.momentary 280 bar) Waryński. WMV series motors have a compact design, high torque and high absorption. Possibility of parallel or series connection. In order to achieve longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMV series motors are characterized by smooth operation, efficiency, transfer of high longitudinal and transverse loads.

Producent - WARYNSKI

Roller diameter - Ø50 mm

Max. working pressure - 24 MPa (240 bar) - Note: maximum 6 seconds / 1 minute of engine operation (exceeding these parameters may damage the engine) MPa (bar)

Connection threads - 1" BSP" inch

Drain connection thread - 1/4" BSP" inch

Max.Nominal pressure - 20 MPa (200 bar) - Note: maximum continuous engine operating pressure MPa (bar)

Max. Rated speed - 475 rpm

Max. Nominal torque - 873 Nm

Max Torque - 1119 Nm

Max. Working Fluid Flow - 150 l/min

Max. output power - 32kW

• net: 1537,49 PLN
• • Currency: zł € $

Silnik hydrauliczny orbitalny WMV 985 cm3/obr (140 bar / max.180 bar) Waryński

Product code WMV-985

Availability: Currently not available

Notify me about availability

Product features:

Description - Orbital hydraulic motor WMV 985 cm3/rev (140 bar / max.180 bar) Waryński. WMV series motors have a compact design, high torque and high absorption. Possibility of parallel or series connection. In order to achieve a longer service life, it is recommended that the optimum operating conditions are at the level of 1/3 to 2/3 of the maximum parameters. WMV series motors are characterized by smooth operation, efficiency, transfer of high longitudinal and transverse loads.

Producent - WARYNSKI

• net: 1899,99 PLN
• • Currency: zł € $